Best 3M Micro Abrassives

This lapping film is made in the USA by 3M (TM). These microfinishing lapping sheets were developed for industrial applications and can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high strength polyester film backing. This fast cutting, water resistant abrasive provides precise, consistent, close tolerance finishes, and are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be affixed to a hard flat surface (usually 1/4 inch glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gem stones. These are PSA and have pressure sensitive backing. They have a 3 mil high-strength polyester film backing which is less likely to tear than traditional wet or dry sandpaper. The sheets are not marked so using their color is the only accurate way to identify them. These Aluminum Oxide (AO) sheets come in the following grades: 1) 0.3 micron (white) or 60.000 grit 2) 1 micron (light green) or 14,000 grit 3) 3 micron (pink) or 8,000 grit 4) 9 micron (light blue) or 1800 grit 5) 12 micron (yellow) or 1200 grit 6) 30 micron (green) or 600 grit and 7) 40 micron (blue) or 300 grit. The sheets are not marked so using their color is the only accurate way to identify. In the finer grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.

Product Description

Used in wet sanding, to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.

From the Manufacturer

For Excellent Results, When Excellent Results Aren’t Easy

For leveling minor dust nibs, adjusting mismatched orange peel, light sanding on acrylic lacquer paint and other sanding jobs where burning or sanding through clear coat and paint are primary concerns, the 3M Wetordry Abrasive Sheet 401Q makes excellent results easier: it’s durable yet flexible, with a sharp cut that leaves a refined finish. The durable paper backing helps create consistent patterns that are easily buffed out. And the silicon carbide grain is available in grades from 1000 up to 3000 for a full range of non-aggressive sanding and polishing jobs on clear coat, plastic and metal, including areas that require hand compounding and for sanding dark colored paints. Choose sheet sizes of 5-1/2 x 9 inches or 9 x 11 inches to suit specific sanding jobs and reduce the need for tearing.

Light, Smooth, Waterproof Backing

3M Wetordry products are backed with a durable waterproof paper backing that supports wet and dry applications. Lighter weight than cloth and smooth rather than textured, the paper backing is preferable for lighter applications such as finishing and paint prep. At the same time, many such applications produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects can be minimized by sanding with water to rinse dust away.

3M’s Fastest-Cutting Abrasive Mineral

Silicon carbide is a very hard mineral that cuts extremely fast. In fact, it is the fastest-cutting mineral abrasive that 3M offers. It features sharp points that fracture easily, resulting in freshly exposed sharp edges that produce a smooth, professional-looking finish. The mineral has a shorter life, but it produces a superior finish.

More Effective Sanding for More Effective Operations

3M puts plenty of science behind the 3M Wetordry Abrasive Sheet 401Q – and not just to improve your finished work. These abrasive sheets make the entire sanding process easier, from the durability of each sheet during wet sanding to faster cutting to easier buffing for faster production times and less labor cost. It’s another way that 3M helps auto body professionals get the most from their operations.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m micro abrassives, eg:

• What are Top 10 3m micro abrassives for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m micro abrassives to buy?
• What are Top Rated 3m micro abrassives to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m micro abrassives?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m micro abrassives.
• Before deciding to buy any 3m micro abrassives, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m micro abrassives and What you should consider when buying the 3m micro abrassives and Where to Buy or Purchase the 3m micro abrassives. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m micro abrassives of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m micro abrassives.

Conclusion

By our suggestions above, we hope that you can found 3m micro abrassives for you.Please don’t forget to share your experience by comment in this post. Thank you!