seemebag 
Nowadays, there are so many products of smallrig for ninja flame in the market and you are wondering to choose a best one. You have searched for smallrig for ninja flame in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings smallrig for ninja flame which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
25,580 Reviews Scanned
SMALLRIG Monitor Cage with Sunhood for ATOMOS Shogun Inferno, Ninja Inferno, Shogun Flame, Ninja Flame 7 inches Monitors – 2008
- FOR Atomos MONITOR: SMALLRIG Atmos monitor hood and cage 2008 is specially designed for Atomos (Ninja flame, Shogun flame, Shogun Inferno, Ninja Inferno). It included a monitor cage, a sunhood and a HDMI Clamp
- NOTE: SMALLRIG shogun inferno cage cage doesn’t fit Atomos Shogun and Atomos Ninja Assassin, if you need a cage for Atomos Shogun or Atomos Ninja Assassin monitors, please take a look at SMALLRIG Monitor Cage 1788
- FEATURES: All-around protection and multiple mounting points for Atomos monitors.The back of cage could help the monitor to dissipate heat. The sun hood ports are used to attach sunhood to shelter the monitor from sunlight
- AN-TI OFF: The SMALLRIG monitor cage includes SSD mount lock to prevent SSD from dropping in detachment. So don’t need to worry your SSD will fall off accidentally
- MOUNTING POINT: The monitor cage features NATO rails and 2 cold shoes. Besides, 1/4″ and 3/8″ threaded holes are accessible for SMALLRIG Magic Arm 2065/2066
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard – 2174
- 【FOR MONITOR】 SMALLRIG Monitor Mount 2174 is designed to hold your monitor onto any cage or handle via 3/8″threaded hole for ARRI standard. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios.
- NOTE】The monitor mount is compatible with 5 inch or 7 inch monitor and supports monitor up to 1.5kg. Also, if a cage haven’t locating holes for ARRI standard, you can mount optional Mini Plate 2171 via two 1/4″ threaded holes first, then it allows to attach the monitor mount 2174.
- 【ROTATION ADJUSTMENT】 Rotation axis enables this monitor holder to adjust the position of monitor up to 180° with only one hand for better monitoring as per your needs at different directions during shooting.
- COMPATIBLITY】 The SMALLRIG monitor mount is compatible to SMALLRIG A7III Cage 2087, BMPCC 4K Cage 2203, Z6 / Z7 Cage 2243, D850 Cage 2129, NATO Handle1955 and any cage or handle with 3/8 locating holes.
- 【TOOLLESS INSTALLATION】 The monitor mount connect cage can be tighten by hands via the thumbscrew, which provide a quick release for users. Also, it comes with a hole for using the Allen wrench to re-tighten it.
SMALLRIG Monitor Holder Mount for Camera Field Monitors, Friction Up to 180° – 1842
- 【FOR MONITOR MOUNT】The DSLR monitor holder is designed to hold a monitor onto a camera cage via 1/4’’ screws, and can be tightened more with a hex spanner. You can attach the mount to your cage or accessories with two 1/4’’-20 screws
- 【EASY ADJUSTMENT】Hold fast and adjustable to position it up to 180° as per your need, and two M5 screws are applied for damping based on the weight of monitors, which enables you to have a better monitoring in shooting scenarios
- 【IDEAL FOR DIY】You can attach it to SMALLRIG 25mm rod clamp 1860, so that you could mount a monitor on handlebar of DJI Ronin M/MX
- 【HIGH QUALITY】Made of Aluminum Alloy, is very sturdy and solid. Rubber cushion on the top is utilized to prevent the monitor from scratching
- 【PLEASE NOTE】The max load of this monitor mount is 1.5kg. SMALLRIG provides friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty
SMALLRIG Field Monitor Holder Mount with Cold Shoe for 5 inch and 7 inch Monitor, Swivel and Tilt – BSE2346
- 【FOR MONITOR MOUNT WITH COLD SHOE】SMALLRIG Monitor Mount 2346 is designed to hold your monitor onto the top of the camera or other mounting systems via a cold shoe adapter, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The field monitor mount is compatible with 5 inch and 7 inch monitor
- 【SWIVEL AND TILT】The camera monitor holder enables to swivel 360° sideways and tilt 140° with free-stop in any positions. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios
- 【FIRM LOCKING】The field monitor holder connects with monitor firmly via a 1/4-20 screw on the bottom. The size of the thumbscrew head is increased so that it’s easy to install. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don’t need to worry about the monitor fall off
- 【RUBBER CUSHION】This SMALLRIG camera monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching
- 【HIGH QUALITY】The robust mount is CNC-Machined Aluminum and can support 5 inch and 7 inch monitor up to 1.2kg, which makes it lightweight and durable at the same time
SMALLRIG Monitor Cage for Atomos Shogun Ninja Assassin – 1788
- It’s only compatible for Atomos Shogun and Ninja Assassin (Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame, Shogun Studio and other monitors CAN NOT be used on this cage)
- This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions
- A NATO rail on each end of the top for attaching NATO rail clamps
- comes with a HDMI lock
- anti-off device to prevent the SSD card from sliding
- equipped with a NATO rail on the bottom to attach NATO rigs
- Enable an access to mount the SmallRig sunhood for Atomos Shogun and Ninja Assassin Monitor
- Package includes: 1 * monitor cage, 1 * cable clamp, 2 * 1/4″-20 screws
SmallRig Monitor Cage 1788 for Atomos Shogun and Ninja Assassin is a form-fitting protective monitor cage, which enables an access to attach a power supply and handles.
The mounting of shoulder strap provides more convenience for shooting. Meanwhile, you can also attach a cold shoe mount to achieve more accessories connection.
There is a NATO rail on the bottom, which allows for NATO components quick attachment.
This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions.
Here is a solution may meet your need: You can use the monitor cage with your Atomos Shogun and Ninja Assassin 7″ Monitor, then you can buy our SmallRig NATO Lock Clamp 1254 (B06XSW7LQN), 15mm rods 1049 (B01MU3H4NA), SmallRig Single 15mm Rail Clamp 1549, SmallRig top handle 1638 (B01N9ETNNW) or SmallRig top handle 1446 (B01MRUNZ5W), SmallRig GH5 cage 1965(B0714D2HBJ) or SmallRig 2049(B075R7238M), then attach SmallRig Quick Release Plate (Manfrotto Style) 1647, an ideal solution for your GH5, which can bring you different and comfortable shooting experience.
Compatibility with Atomos Shogun and Ninja Assassin.
Please note Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame and other monitors CAN NOT be used on this cage, if you need a cage for Shogun Inferno, Shogun Flame, Ninja Inferno or Ninja Flame, please take a look at SmallRig Monitor Cage 2008.
Package Includes:
1 x monitor cage
1 x cable clamp
2 x 1/4″-20 screws
Product Dimensions: 215x133x34.5mm
Net Weight: 258g
Package Size: 270x170x45mm
Package Weight: 330g
Material: Aluminum Alloy
SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig – 2071
- ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw
- ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp
- ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter
- ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail
- ▶ What You Get: 1 x Ballhead with 1/4’’ Screw
- 1 x Ballhead with NATO Clamp
- 1 x Ballhead Clamp
- 1 x Hex Spanner
SMALLRIG Field Monitor Holder Mount with Quick Release NATO Clamp for 5 inch and 7 inch Monitor, Swivel and Tilt – 2347
- 【FOR MONITOR MOUNT】( PLEASE NOTE: The item DOES NOT include the NATO CLAMP. ) SMALLRIG Monitor Mount 2347 is designed to hold your monitor onto the top of the camera or other mounting systems via a nato clamp, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The monitor mount is compatible with 5 inch or 7 inch monitor
- 【SWIVEL AND TILT】The field monitor holder enables to swivel 360° sideways and tilt 150° which allows to hold your monitor onto any position without using tools. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios
- 【FIRM LOCKING】The camera monitor mount connects with monitor firmly via a 1/4-20 screw on the bottom. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don’t need to worry about the monitor fall off
- 【RUBBER CUSHION】This camera monitor holder comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching
- 【HIGH QUALITY】The robust mount is CNC-Machined Aluminum, which makes it lightweight and durable at the same time. And the max load of this monitor mount is 1.2kg
Description Key Features:
1.Supports 5”and 7” Monitor up to 1.2kg
2.Swivel 360° and Tilt 150° with Free-Stop in any position
3.Features holes on Thumbscrews for Hex Spanner
4.Rubber Pad on the Top to Prevent Scratching
5. Quick Release Nato Clamp with Lever
Compatibility:
SmallHD Focus Series
SmallHD Focus OLED Series
SmallHD UltraBright Series
SmallHD 500 Series, 700 Series
Atomos Ninja Series
Atomos Shogun Flame
Blackmagic Video Assist 5”
Other 5”or 7”Monitor Kit Weights less than 1.2kg
Package Includes:
1 x Monitor Mount
1 x Hex Spanner
Product Dimensions: 46 x 49x 36mm
Package Dimensions: 76 x 63 x 40mm
Net Weight: 84g
Package Weight: 108g
Material(s): Aluminum Alloy
SMALLRIG Articulating Rosette Arm Max 11” Long with Cold Shoe Mount & Standard 1/4"-20 Threaded Screw Adapter – 1498
- Durable construction with a locking control knob to release or engage the tension, this articulating arm simplifies the mounting, placement and adjusting any on-camera lighting and other accessories.
- Stainless steel Rosette joint, much stronger and more stable.
- Stainless steel ends
- Max 10 Inches Long
- Maximum load capacity: 3kg
- Best weight load 1.5-2 kg.
SmallRig Articulating Rosette Arm(10″) 1498
Durable construction with a locking control knob to release or engage the tension, this articulating arm simplifies the mounting, placement and adjusting any on-camera lighting and other accessories.
Features:
1. Stainless steel Rosette joint, much stronger and more stable.
2. Stainless steel ends
Similar items with 4 stars and above
SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig – 2072
- Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design
- Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp
- Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail
- Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually
- Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg
SmallRig Double-End NATO Clamp Ball Heads with Ball Head Clamp Monitor Mount 2072
Key features:
1. Quick release with the NATO rail design
2. Easy tight locking with the rotary knob
3. 360-degree rotation
SmallRig Double NATO Clamp Ball Heads 2072 can not only be attached to camera cages with NATO rail (such as gh5 cage rigs, SmallRig 2049: B075R7238M, SmallRig 2050: B076HJXT2X, SmallRig 2051: B078MKFZ1M, SmallRig 2052: B076HGX2PB) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Smallrig Video Assist Cage(5″) for Blackmagic 1726 (ASIN:B06ZZBVFPG), Ninja Assassin Monitor Cage SmallRig 1788 (ASIN:B071R2PP3L), 7″ Monitor cage 2008 for ATOMOS Shogun Inferno, Ninja Inferno, Shogun Flame, Ninja Flame (ASIN:B072QKXQKT) and Monitor Cage SmallRig 1834 for Small HD 700 Series(ASIN:B071CKJF1Y).
The NATO rail design enables quick release and slide adjustment.
The combination of double ball head enables the 360 degree rotation so that the monitors can be adjusted in different angels.
Users can easily lock the ball head tight and stabilized by hand due to the rotary knobs.
In addition, each ball comes along with a rubber pad. The rubber pads protect the monitors from scratching.
Compatibility:
Universal
Package Includes:
an articulating arm with double ballhead nato clamps
Product Dimensions: 140x26x52mm
Net Weight: 145g
Package Size: 155x80x40mm
Material(s): Aluminum Alloy, Steel Stainless
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy smallrig for ninja flame, eg:
- What are Top 10 smallrig for ninja flame for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 smallrig for ninja flame to buy?
- What are Top Rated smallrig for ninja flame to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) smallrig for ninja flame?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for smallrig for ninja flame.
- Before deciding to buy any smallrig for ninja flame, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose smallrig for ninja flame and What you should consider when buying the smallrig for ninja flame and Where to Buy or Purchase the smallrig for ninja flame. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 smallrig for ninja flame of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about smallrig for ninja flame.
Conclusion
By our suggestions above, we hope that you can found smallrig for ninja flame for you.Please don’t forget to share your experience by comment in this post. Thank you!
