Best Small Electric Hot Water Heater 120V

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

Product Description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with (1) 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLY SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 120°F @ 1GPM

Max. Amperage: 23A

Recommended wire size: 12AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual and warranty card

1X Installation accessories

1X Remote control(for Black model)

Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.

Product Description

Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.

From the Manufacturer

The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Specification:
Material: Stainless Steel Shell
Color: Black, Golden, Red(optional)
Power: 3000W
Current: 25-32A
Voltage: 110V
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Installation wire diameter: 1.5-2.5mm² copper wire
Water pipe interface: G 1/2″ interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch

Packing list:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual

Question:
Why the water is not hot?

1.The working current of our water heater is 25A-32A, and it require at least 1.5 square millimeters of wire. Please make sure that your circuit breaker can handle the 30amp, or it will not heat water.
2.The temperature is controlled by the size of the water flow. The Water Heater will be automatically energized when the water flow is more than 0.6 liters, and automatically turn off when the water flow is lower than 0.4 liters.
3.The heating temperature is between 30 and 55 degrees. If the water flow is large, the temperature will be low, and if the water flow is small, the temperature will be high.

Conclusion

By our suggestions above, we hope that you can found small electric hot water heater 120v for you.Please don’t forget to share your experience by comment in this post. Thank you!