The 9 Best Reptile Heating Thermostat

“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions： Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning： If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”

Don’t bother fiddling around with your thermostat— let the Ohuhu Thermostat Temperature Controller do the hard work for you. This small and sleek remote keeps your garden, fish tank, and hatchery at a comfortable temperature (between 68°— 108°F) with just the touch of a button. The thermostat controller will turn off when your desired heat is reached and will turn on again if the temperature drops. Simply adjust and set your temperature for steady heat all day long. Operation is easy— just plug it in, set it down, or hang it up. Make your life easier with Ohuhu!

“Hydrofarm’s Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6′ cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat’s functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing. ETL certification is proof that a product complies with widely-accepted safety standards. The Jump Start Heat Mat Thermostat is compatible with all heat mats, and is an optional accessory for Hydrofarm Seedling Heat Mats. “

Zoo Med’s new ReptiTherm Habitat Heater is designed for use with large, heavy reptiles such as tortoises, or in large “zoo” style enclosures with Monitors, Tegus, Iguanas, and other large lizards.

Infrared Ceramic Reptile Heat Bulb: Specifications: Socket: E26Volt: AC 110-120VWatts: 150WMaterial: Ceramic, Diameter of heating surface: 85 mm Note: 1. Lamp surface temperature is too high, do not directly touch during it works. 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald. 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment. 4. Please adjust the distance between the lamp and the pets, at least 35cm. 5. Please away from combustible or explosive materials. ; Digital Thermostat Controller: Specifications: Temperature control range: 40-108°FTemperature display range: 32-140°FRated Voltage: AC 120V 60HzMax Loading: 8A 1000WEasy plug-in operation with LED illuminated indicator lights & three-prong ground plug The cord of the temperature probe and grounded three-prong plug is 6 feet ETL certification is proof that a product complies with widely-accepted safety standards Digital thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. Abnormal Warning: 1. If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees Fahrenheit. 2. If thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees Fahrenheit. 3. If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor. Clamp Light: : 120VWatt: Accepts up to 150W bulb (E26)Reflector Diameter: 8. 5 inch Cord: 6 Feet 18/2 SPT-2 Cord UL Listed Clamp light can also be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptiles pets terrarium heat lamp, and even a growth light for indoor plants. Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use.

The Zoo Med Reptitemp Digital Thermostat allows you to maintain precise control of your terrarium temperature with an easy-to-program LCD interface. Just plug in your heating device (up to 600 watts) or cooling device (up to 150 watts), set the desired temperature and mode, and let the Reptitemp handle the rest! 1 year manufacturer warranty

Conclusion

By our suggestions above, we hope that you can found reptile heating thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!