Which Is The Best Petg Hard Tubing Cooling
Nowadays, there are so many products of petg hard tubing cooling in the market and you are wondering to choose a best one. You have searched for petg hard tubing cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings petg hard tubing cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid cooling loops
- Four Built in O rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open End Wrench is Included
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black
Dimension: D26 x 21 (H) (mm)
Applicable: OD : 16 mm
Weight : 320 g
Material: CU + AL
Screw Thread: G 1/4
Note: PETG Tube to G1/4
Similar items with 4 stars and above
PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD
Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.
PrimoChill 1/2in. O.D. Rigid PETG Tube 30in. – 12 Pack – Clear
PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the Next Best thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting. Measure – Cut – Bend – Install- DONE! Comes in a variety of colors to fit your individual build. Please watch our Youtube video for a bending how to.
Barrow Hard Tube Tool Suite for 14mm OD Rigid Tubing
Designed for users looking to create bends using 10mm ID / 14mm PETG tube, each kit contains Mandrels for 180 degree, 90 degree and 45 degree bends. Silicone insert supports tube during the bending process to prevent kinks and promotes smooth bends while keeping inner tube wall structure. Finish up your masterpiece with the pipe cutter for a near perfect beveled cut every time. Includes mandrel set, chamfer tool, cutters, and silicone insert.
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
XSPC PETG Easy Bending Tool
XSP PETG Easy Bending Tool suitable for 12-14mm outer diameter PETG tubing.
fosa 4 Pcs/8 Pcs OD 16mm Tube Fitting, Water Cooling Compression Fitting with Sealing Ringsfor Rigid AcrylicTube for Computer Water Cooling System(Black, 4 Pcs)
- Suitable for 16mm outer diameter rigid tube (Including plastic material and metal material tubes)
- Three-layer sealing rings, good sealing performance, eliminating leakage risks
- High quality brass materials, durable for long term use
- Fine workmanship, has passed EU ROHS certification
- A variety of colors can be chosen for your different needs
Suitable: for 16mm Outer Diameter Rigid Tube
Options: 4pcs Red, 4pcs Blue, 4pcs Green, 4pcs White, 4pcs Black, 4pcs Silver, 6pcs(Red+Blue+Green+White+Black+Silver)
Inner Diameter: Approx. 17mm / 0.67in
4 or 6 x Water Cooling Tube Fittings
8 or 12 x Sealing Rings
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 45 Degree Compression Fitting Cooling – CL-W096-CA00BL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing
- Black Coating Brass Fitting
- G 1/4″ Port
- For PETG Tubes: Outer Diameter 5/8″ (16mm)
- 3 Pre-installed O-Ring: Prevent coolant from leaking
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.
Bykski 10mm ID x 14mm OD Rigid PETG Tube – 4X 750mm – Clear
Using metric size fittings? The Bykski PETG tubing is crystal clear and easy to work with. Sold as a 4 pack , each stick is 750mm long giving you plenty to outfit your entire system!
Secondary pictures shows 3 metric sizes for reference.
With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid PETG Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.
By our suggestions above, we hope that you can found petg hard tubing cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best petg hard tubing cooling: Top-Rated Brands & What to Buy