The 9 Best Pc Water Cooling Sensor

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

This temperature sensor is equipped with a G1/4″ inner- and a G1/4″ outer thread and can therefore be integrated easily even directly on a waterblock or radiator. The sensor is equipped with a 60cm long cable and has a two-pin plug for connection.

Model: 53067

Specifications:
Monitoring Range: -50 ~110 degrees
Voltage: 5V – 24V
Interface: Big 4P
Screw Thread: G1/4
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Applicable Pipe: 9mm Outer Diameter
Thermometer Panel Size: Approx. 47.8 * 28.2mm
Package Size: Approx. 12 * 9 * 3cm
Weight: 98g
 
Package List:
1 * Water Flow Meter
1 * Thermometer
2 * Connectors
2 * Clamps
 
Note:
●Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
●Product’s size made for manual measurement,  1-2CM error belongs to the normal range.

The new temperature sensor from Phobya with g1/4″ inner thread and G1/4″ outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it’s low height of only 11,6mm (without threads) allows it to fit below almost any connector. The sensor cable is equipped with a standard 2-Pin plug. High-Flow, no narrowing of the cooling channel inside of the sensor! Also see example of installation. This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.

Model: 71227

XSPC G1/4″ plug with built in temperature sensor

Model: 5060175584168

The sensor can be connected to the XSPC V2 LCD temperature sensors with 2pin connection on the back.

Model: 5060175584175

Specifications:
Monitoring Range: -50 ~110 degrees
Voltage: 5V – 24V
Interface: Big 4P
Screw Thread: G1/4
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Applicable Pipe: 9mm Outer Diameter
Thermometer Panel Size: Approx. 47.8 * 28.2mm
Package Size: Approx. 12 * 9 * 3cm
Weight: 98g

Package List:
1 * Water Flow Meter
1 * Thermometer
2 * Connectors
2 * Clamps

Specification:
Materials: Brass + PVC + ABS
Color: Shown as pictures
Applicable: All G1/4 thread water cooling equipment
Voltage: 5V-24V wide voltage
Temperature Range: -50 – 110 degrees
Power Connector: 4p D port
Quantity: 1 PC (other accessories demo in the picture is not included)
Size: Panel part length: approx. 47 * 28 mm/ 1.9 * 1.1 in
Probe Wire Length: approx. 100 cm/ 39.4 in
Power Cable Length: approx. 50 cm/ 19.7 in
Package Weight: 44 g

Package list:
1 * Temperature Meter

Inline filter with replaceable stainless steel mesh. Supplied with replacement mesh filter and two replacement o-rings.

Model: 5060596650343

Conclusion

By our suggestions above, we hope that you can found pc water cooling sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!