seemebag 
Nowadays, there are so many products of outdoor heating blanket for pipes in the market and you are wondering to choose a best one. You have searched for outdoor heating blanket for pipes in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings outdoor heating blanket for pipes which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Backflow Preventers Protection, 16”W x 20”H Backflow Winter Cover, Insulated Cover Pouch for Irrigation Backflow Valve, Sprinkler Valves in Snow or Sun Exposure, Winterizing Backflow Preventers – Sand
- Dimensions – 16” W x 20” H (Fit up to 14” wide backflow valves system). If you are not sure the size or have any other question about our product, please feel free to email us, we are pleasure to help you. Measure your backflow system before purchasing to make sure that this cover is suitable for your backflow valves system. Save your time waiting for exchanges.
- Insulation & Waterproof – Made of heavy material 600 Oxford Fabric and Industrial Grade Insulation EVA rubber foam, triple stitching for max security, has both waterproof and insulation effect. It can also be used in all construction and commercial building for maximum protection.
- Avoid High Repair Costs – Protects your backflow pipe systems from freezing, bursting and blowouts due to the severe weather conditions like snow, rain, wind and sun exposure heating. Avoid expensive cost for valve replacing and repair every year.
- Appearance – The Sand color will match the color of most of the houses and will blends in with the limestone wall.
- Stay Sturdy – Put the cover on your pipes and close it with the Velcro Strips. No more tools and screws. Keep your insulated pouch in place. No worry dogs to get it away and the wind blowing it away. It is very easy to setup.
PHOENIX CABLES USA Pro Cold Weather Valve and Water Pipe Heating Cable/Multi-use for rigid plastic or metal pipes, preventing RV hose freezing or down a gutter downspout (6 Feet)
- QUICK AND EASY INSTALL – No more confusing instructions! Set it up and forget it with confidence the first time around with our easy to understand BONUS eBOOK. Our heat tape for water pipes install effortlessly for constant water flowing down to -40° F (-40° C) without monitoring thanks to the built-in thermostat. Rest assured as the indicator light let’s you know your Phoenix heating cable is ready to take on the harshest seasons.
- SAVE THOUSANDS ON COSTLY REPAIRS – Don’t wait before it’s too late and get stuck paying thousands of dollars on unexpected repairs that could be avoided. Our high-grade cables are tough and durable enough for rigid plastic and metal pipes up to 1. 5” (38mm) in diameter. With our trace heat cables you’ll always stay prepared for the unexpected.
- SAVE MONEY ON ENERGY AND – 120 Volt, 7 watts/ft. and only use 5 amps or less of electricity making our heating cables for a low economical footprint. Saves you money by using less energy by powering the cable only when needed by automatically turning on below 38° F (3° C) and off above 45° F (7 ° C).
- SAFETY TESTED FOR ALL SEASONS – Compromise elsewhere when it comes to the safety of your home. Get peace of mind with our safety rated cables constructed with a continuous ground braid with a tough and durable polyurethane inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Approved for water filled plastic (including PEX) and metal pipes only.
- UL APPROVED, CSA CERTIFIED – Made of superior industrial grade heat shrinkage tube for connection, our cable is considered to be the safest per industry standards. Set up includes: heating cable, grounded plug, built-in automatic thermostat and easy to understand instructions. Our cables plug into a standard 120 VAC outlet.
NO MORE FROZEN PIPES EVER AGAIN What so special about our water pipe heating cable? Our energy efficient cables save on costly repairs by keeping your pipes flowing – no matter how cold it gets by turning on and off automatically. No more complicated install instructions! You get our easy BONUS eBOOK to help with your one time simple and easy install for peace of mind all year long. OTHER KEY BENEFITS: WORRY-FREE AUTOMATIC THERMOSTAT Once installed – set it and forget it. The self monitoring cable turns on below 38 degrees F and off above 45 degrees F MULTI-USE FOR RIGID PLASTIC OR METAL PIPES Use on your RV water hose or down a gutter downspout; wherever you need flowing water, just install our Phoenix Heat Cable SAVES MONEY USING 70% LESS ENERGY Uses power only when needed and consumes less than 5 amps that saves you money #1 SAFETY: UL APPROVED / CSA CERTIFIED Our package includes cable, grounded LED plug that indicates that the cable is working, thermostat and an instruction manual for easy install THE FINE PRINT – 100% MONEY-BACK Our Phoenix pipe heating cable is made with high quality materials for lasting usage. We’re certain you’ll love our product or you’ll get your money back. Our cables MAKE THE PERFECT GIFT for anyone that loves the outdoors and uses RV’s so ORDER NOW! Simply click “ADD TO CART” at the top of this page to order yours today!
HEATIT ET-21 Freeze Thermostatically Controlled Outlet On at 38F /Off at 50F
- Thermostat control outlet with the smart indicator light: The indicator light turns on when it’s below 38 and it has energized the outlet.
- Energize below 38℉(3℃) and to turn off automatically at approximately 50℉(10℃). Automatically turns power on and off according to ambient temperature. Save energy and save money
- Easy installation: just plug this device into electrical outlet. Maximum 15 amps. CSA approved. Only for dry location.
- Can be use for other applications: 120 VAC electric heaters, gas heater, Engine heaters, pipe heat tape, roof heating cable and so on
- Make a test when you received the product. Put it into the freezer for 45 minutes. And then plug in and you will see the red light on the thermostat control. Two year limited warranty- If you are not completely satisfied with HEATIT ET-21, please don’t hesitate to contact us in any time, we’ll try our best to solve your issues.
HEATIT JHSF 6-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
Similar items with 4 stars and above
Frost King HC30A Heating Cables, 30 Feet, Black
HEATIT HISD 6-feet Pipe Heating Cable with with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
Duck Brand 1285244 Pipe Wrap Insulation for Hot or Cold Pipes, 3-Inch Wide x 1/11-Inch Thick x 25-Feet
Product Description
Protecting pipes can prevent energy loss and help you save on energy bills. Duck Brand Foam Pipe Covers are great for insulating both hot and cold pipes, preventing them from winter freezing and summer sweating. Made from plastic fiber, this wrap provides the same insulating value as fiberglass without the need for gloves or masks. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.
Amazon.com
Protecting pipes can prevent energy loss and help you save on energy bills. Duck Brand Foam Pipe Covers are great for insulating both hot and cold pipes, preventing them from winter freezing and summer sweating. Made from plastic fiber, this wrap provides the same insulating value as fiberglass without the need for gloves or masks. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.
3M 3311 Silver Aluminum Foil Tape – 2 in. x 5 yd. Vapor Resistant Rubber Adhesive Foil Tape Roll. Adhesives and Tapes
- Adhesive Tape: this foil tape with aggressive rubber adhesive sticks well to most surfaces. The vapor shielding tape also adheres to irregular surfaces, irrespective of the weather conditions
- Applications: the silver aluminum tape can be used for shielding, patching, seaming, and sealing to protect the materials from moisture, heat, odor, and chemical transmission. It is ideal for use in repair tasks
- Temperature Friendly: the odor resistant tape meets American UL-723 standards for flame spread and smoke. The rubber adhesive tape dissipates excess heat and ensures heating and cooling efficiency of sensitive materials
- Multipurpose Tape: this adhesive foil tape works suitably well in general, commercial, and industrial applications. It can be used for aluminum seams and joints, sheet metals, fibrous and metal ducts, and aluminum backed duct boards
- Specifications: this silver foil tape measures 2 in. in width, 5 yd. in length, and weighs 0.32 oz. The paper-lined tape can sustain -10 deg. – 180 deg. temperature
3M Silver Tape is backed with aluminum foil and rubber adhesive for sticking perfectly to the surfaces. The aluminum backed tape features a high-tack, pressure sensitive adhesive that bonds equally with regular, irregular, smooth and powder-painted surfaces. This silver tape is ideally used for patching and seaming tears in sheet metals, metal ducts, aluminum backed fiberglass and thermal insulation systems. Insulation tape has high heat reflectivity and thermal conductivity features to protect heat-sensitive apparatus from vermin, high and low temperatures, moisture, and fire smoke. The 5 yd. long and 2 in. wide heat-reflective tape can be used in all weather conditions.
Conclusion
By our suggestions above, we hope that you can found outdoor heating blanket for pipes for you.Please don’t forget to share your experience by comment in this post. Thank you!
