Which Is The Best Ninja Bullet Blade
Nowadays, there are so many products of ninja bullet blade in the market and you are wondering to choose a best one. You have searched for ninja bullet blade in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja bullet blade which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
23,350 Reviews Scanned
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
NutriBullet Replacement Extractor Blade, Replacement Parts & Accessories Fits Nutribullet 600W/900W Models (Pack of 2, Grey)
- QueenTrade Nutribullet Replacement blade, 2pcs Replacement Extractor Cross Blades for NutriBullet pro 900w Blender/Mixer System
- This Nutribullet blade ONLY Fits for Nutribullet Pro 900W Blender
- Does NOT FIT Nutribullet 600w , Lean, RX, Magic Bullet or Ninja blenders.
- Material: High quality plastic and stainless steel and will NOT need sharpening
- Size: 10*4cm/3.94″*1.57″
- Nutribullet Replacement Parts & Accessories & We make no claims that these are original NutriBullet products
Package: 2pcs Replacement Cross Blades for nutribullet pro 900w blender / mixer
The blade is made of stainless steel and never needs sharpening
High quality plastic and stainless steel that is 100% safe for dishwasher ;
Only Fits For Nutribullet pro 900 Watt Includes rubber gasket
Does not fit Nutribullet 600w, Lean, RX, Magic Bullet or Ninja blenders.
Nutribullet Replacement Parts, Not original; We are not affiliated with Homeland Housewares.
We will re-check the quality before delivery, 100% new, Please do not worry about purchasing
Do not hesitate to contact us for any question. It is our great pleasure to serve you.
NutriBullet Replacement Extractor Blade – Premium NutriBullet Replacement Parts & Accessories (Pack of 2)
- Replacement for NutriBullet Extractor Blade with Gasket. Fits Nutribullet Pro 900 and 600W Only. Does NOT fit Nutribullet Lean, RX, Magic Bullet or Ninja blenders.
- STAINLESS STEEL: This blade is made of stainless steel and will NOT need sharpening!
- DISHWASHER SAFE: High quality plastic and stainless steel that is 100% safe for dishwasher.
- PERFECT SEAL: Includes rubber gasket pre-installed in base for complete seal with cup
- We make no claims that these are original NutriBullet products but they work just like the original.
High-Quality: Made from high quality molded plastic Nutribullet blade blender base with stainless steel blades.
Compatibilety: Compatible with all NutriBullet Original (600 watts) & NutriBullet Pro (900 watts) blender accessories.
NOT Compatible: This blender cup WILL NOT WORK with NutriBullet Lean (1200 watts), NutriBullet RX (1700 watts) blenders, Magic Bullet or Ninja blenders.
Dishwasher Safe: It is made from high-quality plastic that is 100 safe for the dishwasher.
Percect Seal: It has a rubber gasket built in for a perfect seal with NutriBullet cups every time with no leaking.
Easy Handling:The threads are smoothed to make for easy on and easy off attachment of accessories.
We make no claims that these are original NutriBullet products but they work just like the original. We are not associated with Homeland Housewares LLC.
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Ninja Blender Bottom Blade 7 Fins For Nutri Ninja Pro Extractor Blade Nutri Ninja Auto iQ BL480-30 BL482 BL642 NN102 BL682 BL2013 BL640 BL642Z BL480D, Nutri Ninja Blender Auto iQ Blade
- 【Bottom Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【 Replacement Parts for Nutri Ninja 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 3 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Risk-free Purchase】 The warranty is 12 Months. We will issue full refund if you are not satisfied with the products.If there is any problem with the product, please contact us in time, we will promptly replace it for you or make a full refund.
Blender Bottom Blade (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it 3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line 5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly 7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
NLSD Replacement Parts Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL480-30 BL681A-30 BL682 BL640, ((7 fins) Black
- ⚠ BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) The blade has MALE FINS 3) 4″ (10cm) Diameter.
- 7 fins blade Fits for Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
- Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682.
- 7 fins blade Fits for Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
- Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
- NOT FIT BL66x,BL77x,BL8xx, NOT FIT model # end with 70 (not fit for BL450-70,BL451-70,BL454-70,BL480-70,BL484-70)BL481-70,BL482-70,BL483-70
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
(1) Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
(2) Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682
(3) Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
(4) Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30 (Only fit for 18oz, 24oz, 32oz not fit for 16oz)
NOT FIT for: 6 pins, model# end with 70, BL6XX, BL7XX, BL8XX, NJXX
NOT FIT For: BL620C, BL660, BL663, BL682, BL201, BL610, NJ600, BL740, BL772, BL771, BL770, BL682, BL830, BL780, BL810 BL820 BL830
Warranty Policy
*All products sold by NLSD are covered by 3 months warranty.
*NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
*If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
*Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
Ninja Blender Replacement Blade, Replacement Blender Part, Ninja Blender Blade, for Nutri Ninja Pro & Auto, iQ Series, 7 Fins Extractor Blade Assembly Fits 12 18 24 32 Oz Blender Cup, with Extra 2 Replacement Gaskets
- ★EASY TO SPIT& ROTATE QUIETLY – Are you upset for your Ninja Blender makes a lot of noise or is it leak crazy after using for years?Buying a new one is waste of money, you can solve your problem just get the ONEBOM Ninja Blender Replacement Blade! This ninja blender blade assembly rotate at high speed and quiet to liquefy ingredients into smooth nutrient juices, smoothies and purees. Bearings were good and shaft rotated easily. It’s sealed well, no leaks.
- ★FOOD GRADE STAINLESS & TOTAL CRUSHING – This is a great quality replacement blade for the Ninja! It’s made of food grade 304 stainless steel, safety, rustproof &easy to clean. The sharp blender replacement blade make it easy to crush ice to snow and blast through fruits and vegetables in seconds. Powerful Extraction provides great tasting, nutritious beverages.
- ★PERFECT FIT FOR 7 FINS BOTTOM BLADE – Widely used for the any ninja model ,pls see the picture we displayed.WARMNOTICE: Your ninja bottom would be 7 fins and other model is not compatible if don’t remark.
- ★WORTH TO GET THEM – With the package you will get: 1x Blade Replacement with gasket, 2 x Free Replacement Gasket (ensures long lasting use) Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade. Fit for 12oz, 18oz, 24oz, 32oz Nutri Ninja cup (not fit for 16oz).
- ★BUY WITH NO REGRET – All the ONEBOM products tested before pack it to Amazon. Click the “Add to Cart” Button and Buy with No Regrets. Just turn them back if You Got Any Problem but don`t want to contact us.
NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins for Nutri Ninja Auto iQ BL480D BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade
- Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) The blade has MALE FINS 3) 4″ (10cm) Diameter.
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- Note2: Be careful of the blade when open the package
Replacement blade Nutri Blender Pro Extractor Blades for Nutri Ninja Pro Extractor Blades for Ninja fit QB3000SSW and Ninja 2-in-1 QB3000 QB3004 QB3005 Nutri Ninja Pro Extractor Blades
Fits all Nutri Ninja 2-in-1 (QB3000 QB3004 QB3005) Fits all Ninja fit QB3000SSW Authentic Ninja part Includes one Nutri Ninja Pro Extractor Blades
Mithome Ninja Blender Replacement Parts, Ninja Blender Parts Nutri Ninja Blender Blade Ninja Blender Accessories Extractor Blade Assembly with 7 Fins for BL682 BL642 BL482 BL450 BL491 NN102 NN103
- HEALTHY MATERIAL: Ninja blender replacement is made of food grade PP and high-strength stainless steel, environmentally friendly , healthy material, BPA free, no metal aftertaste, no oxidation, colorfast, reusable. Easy to clean, just need put in water and wash it.
- NINJA BLADE APPLY TO: 7 fin ninja blender blade replacement fits for BL2012, BL2013, BL480, BL480D, BL482, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100A, NN101, NN102 (Please confirm that it’s matching model before purchase.)
- RAPID AGITATION: Consists of 4 sharp stainless steel blades. Nutri ninja replacement parts can easily pulverize fruits, vegetables, superfoods, nuts into a delicious, smooth texture. Help you quickly whip up and make delicious juices, smoothies, protein shakes, etc. keep the original nutrients of the food. Ideal for Household blenders.
- IMPORTANT TIPS: The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade replacement, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your Juicer uses 7 fins.
- 100% RISK FREE PURCHASE: Mithome 7 Fins Ninja Blade has a one-year warranty. Order from Mithome, you can return or exchange for any reason, true worry-free shopping experience.
Mithome Ninja Blender Replacement can quickly whip up your favorite fruit-and smoothies, help you put together healthy meals faster, and maintain the original nutrients of the food.
Color:Black
Item Type: Ninja Blender Replacement Parts
Material: food grade PP material + stainless steel
Blade shape: Cross blade
This 7 Fins Replacement Blade Parts fit for: (Only fit for 18oz, 24oz, 32oz not fit for 16oz)
Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/
BL681A-30/BL682-30/BL642W/
Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30/BL486CO-30
Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
Packing including:
1x 7 Fins Bottom Blade Replacement
Tips:
Please check the rubber gasket and be sure it is put snugly into the bottom blade.
(The rubber gasket is used to avoiding a leak)
If you have any questions, please feel free to contact us and we will respond within 24 hours.
Similar items with 4 stars and above
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja bullet blade, eg:
- What are Top 10 ninja bullet blade for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja bullet blade to buy?
- What are Top Rated ninja bullet blade to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja bullet blade?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja bullet blade.
- Before deciding to buy any ninja bullet blade, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja bullet blade and What you should consider when buying the ninja bullet blade and Where to Buy or Purchase the ninja bullet blade. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja bullet blade of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja bullet blade.
Conclusion
By our suggestions above, we hope that you can found ninja bullet blade for you.Please don’t forget to share your experience by comment in this post. Thank you!