seemebag 
Nowadays, there are so many products of kanthal a1 heating element in the market and you are wondering to choose a best one. You have searched for kanthal a1 heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings kanthal a1 heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
3000W 3KW AC220V FeCrAl Kanthal A1 Heating Element Coil Heater Wire Line Spiral
- Made from FeCrAl heating alloy, high temperature resistant, corrosion resistant.
- Good thermal efficiency, even heating, safe use and long service life.
- Used in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances.
- Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
- Should not get cut into parts, it will increase the power and can be dangerous.
uxcell 1.4mm 15AWG Heating Resistor Wire Wrapping Nichrome Resistance for Heating Elements 16ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG15
- Wire Diameter: 1.4mm/0.055inch
- Length: 5m/16ft.
- Resistance: 0.7084Ohm/M
- Maximum Operating Temp : 1200C(2192F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
uxcell Heating Element Coil Wire AC220V 3000W / AC110V 750W Kiln Furnace Heater Wire 7.2mm 800mm
- Wire Diameter: 1.2mm/0.047″
- Coil Diameter: 7.2mm/0.28″
- Length: 800mm/31.45″.
- Rated Voltage/Power: AC220V 3000W / AC110V 750W
- Resistance: 15-16ohm.
- Material: FeCrAl
- Main Color: Silver Tone
- Withstands temperatures up to 2100°F.
- Longer Operating Life, Stronger Oxidation Resistance, Sulfur resistance and Resistivity.
- This Heating Wire should be stretched up to at least twice as original length while using.
This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)
Similar items with 4 stars and above
Kanthal A1 – 100′ – 24 Gauge Resistance Wire
Wire Specifications:
– Diameter: 24 Gauge / 0.51mm
– Shape: Round
– Alloy Kanthal A-1
– Length 100 ft.
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
– Resistance: 2.04 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
TEMCo Kanthal A1 wire 24 Gauge 100 Ft Resistance AWG A-1 ga
- 24 AWG, Average wire diameter: 0.0201 in. (0.51054 mm), 2.07 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Similar items with 4 stars and above
Kanthal A1 – 100′ – 22 Gauge Resistance Wire
Wire Specifications:
– Diameter: 22 Gauge / 0.64mm
– Shape: Round
– Alloy Kanthal A-1
– Length 100 ft.
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
– Resistance: 1.31 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
12 in 1 Prebuilt Coils Heating Element Coil Wire for Housing Repairs Use Kanthal A1 + Nichrome 80, 60PCS Wires Set
TEMCo Kanthal A1 wire 16 Gauge 8 oz (79 ft) Resistance AWG A-1 ga
- 16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F
- ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Kanthal A-1 is a ferritic iron-chromium-aluminium ALLOY (FeCrAl ALLOY) rated for use at temperatures up to 1400°C (2550°F). The ALLOY has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries. Made in the USA.
Mixed 550 Feet of Kanthal A1 Wire 22,24,26,28,30,32,34,36 Gauge Pack
This is the perfect combo for electronic or craft wire enthusiasts looking to receive a variety of wire for a great price. 8 Gauges included. 8 spools, 550 feet of wire total You will receive 1 50 ft spool of each 22, 24, 26, 28, 30 and 1 100 ft spool of each 32, 34, 36 gauge Kanthal A1 Wire
– Shape: Round
– Alloy: Alloy Kanthal A-1
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
Kanthal A1 – 50′ – 20 Gauge Resistance Wire
Wire Specifications:
– Diameter: 20 Gauge / 0.81mm
– Shape: Round
– Alloy Kanthal A-1
– Length 50 ft.
– Heat Treatment Annealed (soft)
– Melting Temperature 1500°C / 2730°F
– Max Continuous Operating Temp: 1400°C / 2550°F
– Resistance: 0.853 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
Conclusion
By our suggestions above, we hope that you can found kanthal a1 heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
