seemebag 
Nowadays, there are so many products of heating gun for electronics in the market and you are wondering to choose a best one. You have searched for heating gun for electronics in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating gun for electronics which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Chandler Tool Embossing Heat Gun – 300 Watt – Dual-Temperature Professional Heat Tool – for Embossing Shrink Wrapping Paint Drying Crafts Electronics DIY (Blue)
- Burning your job or blowing powder everywhere? Low Speed/Heat setting for detail work!
- Need more power? High Speed/Heat setting gets big jobs done quick!
- Too hot to hold? Insulated body for comfortable extended use!
- Beware of unsafe heat guns! UL-safety certified for North American use
- Don’t like buying junk? Neither do we. American brand & lifetime warranty
WHY SHOULD I BUY THE CHANDLER TOOL CTHG150D Embossing Heat Gun?
If the Chandler Tool embossing heat gun looks different than others, that’s because it IS different. The ONLY embossing heat gun with TWO temperature settings for maximum versatility. High heat (300℃/572℉) for big jobs. Low heat (200℃/392℉) for detail work. All packaged in a compact insulated body for comfortable prolonged use, the CTHG150D is perfect for a variety of crafting projects such as embossing, shrink wrap, paint & lacquer drying & paint removal, as well as many electronics projects!
QUALITY
Do you like throwing away tools & buying new ones? We don’t. That’s why we build ours to last. With a body made from top-quality impact-resistant plastic and an all-metal precision heating element, this just might be the last heat gun you buy
SAFETY
A defective heat gun is both an electrical hazard and a fire hazard! Beware CE-certified (Europe-only) & non-certified (yikes!) heat guns. UL-certification is the North-American safety standard. UL certification is very expensive & manufacturers are proud to display it, so if a product doesn’t say “UL Certified” you can be sure it’s not. Unlike most embossing heat guns sold online, the Chandler Tool CTHG150D Dual-Temp Embossing Heat Gun is fully UL-certified
WHO IS CHANDLER TOOL?
Born out of frustration with low-quality throw-away tools, Chandler Tool was founded with a single purpose: to create high quality tools that last a lifetime. Though many of our products are produced overseas, we are an American company, building tools to American standards for American customers. Buy with confidence. We stand by our products with American customer service and a lifetime warranty
LIFETIME WARRANTY
If our products ever fail to live up to your expectations, we will make it right. All of our products carry a lifetime warranty against defects in materials or workmanship
SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉（50℃- 650℃）with Overload Protection for Crafts, Shrinking PVC, Stripping Paint
- ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min
- II: 50-650℃, 250-500L/min
- ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉
- Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
- ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders
- Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
- ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface
- Two concentrator nozzles direct a concentrated heat flow to the work surface
- Reflector nozzle disperses heat flow evenly around the whole work surface
- ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
EnerTwist Heat Gun 1500 Watt Variable Temperature Control Hot Air Tool Kit Heating Protect for Shrink Wrapping, Paint Removal, Wiring, Tubing, Crafts, Vinyl Wrap, Automotive, Electronics Repair
- ▲VARIABLE TEMPERATURE – High Heat Adjustable 9-Temp & 3 Fan Speed features high/ low/ cool/ off 4 modes switch and 9-temp control via dialing the rear cover [ I: 140℉(60℃)@ 500 L/min, II: 176℉-572℉(80-300℃) @ 300 L/min, III:176℉- 932℉(80℃- 500℃) @ 500 L/min] can satisfy all your utility
- ▲POWERFUL & RELIABLE – Heavy duty hot air gun with 12.5 Amp motor heats up to maximum temperature 932℉(500℃) quickly in few seconds and performs stable. Professional heater gives outstanding performance by keeping running 500 hours in max temperature (data from lab)
- ▲ ERGONOMIC & SAFETY – Non-slip soft grip and weight balance design for easy-to-use, integrated hands free support stand allows the gun sit upright for hand-free use. With professional built-in overload protection prevents electric heat gun from over heating due to misuse
- ▲ VERSATILE ACCESSORIES – 4 Nozzle deflectors & 5 paint scraper kit extend heat gun utility, Reduction nozzle for welding plastics, solering/ de-soldering, shrink wrapping, loosening seized bolts & nuts. Glass protection nozzle for paint or adhesive stripping neat heat-sensitive materials. Wide jet surface nozzle for paint or adhesive removal. Reflector nozzle for heat shrinking tubing, shaping PVC tubes, thawing frozen pipes
- ▲WHAT YOU GET – 120V Heat Gun Kit with carrying case and 9 accessories. Best for shrink wrapping, crafting, embossing heating, painting, roofing, wire stripping, phone / auto glass repair, tint soldering/desoldering, plastic welding, PVC pipe bending, seized bolts & nuts loosening, replacing tile, waxing skis and snowboards, soften plastics as well as drying and thawing purpose
6.56FT Long Heat Gun, Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp
- ★ Material&Size: 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
- ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
- ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
- ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
- ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don’t use it more than 10 minutes in one time, just turn off then turn on for working continuously
Features:
√ 100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical
√ Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness
√ There are heat vents in left and right sides to decreased the internal temp and extend its lifetime
√ This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
√ The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously
Specification:
Material: Plastic ABS+PC
Cable length: 6.56FT /180 cm
Working temp.: About 200 ℃
Rated Power: 300W
Rated voltage:110v
Power: 50-60Hz
Working time: 8 minutes
Power type: AC power supply
Type: Constant temperature
Attention:
-Do not touch with water! Do not touch the hot nozzle.
-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm.
-Do not use more than 10 minutes continuously to prevent overheated.
-This hot air gun is specially made for DIY, it can’t not use in industry aspect
Package includes:
1 x Hot Air Gun
Heat Gun Variable Temperature, Yome 1800W 140℉~1112℉（60℃- 600℃） Hot Air Gun with 2 Speed-Setting, Overload Protection, 4 Nozzle Attachments for Shrink Wrapping, Crafts, Cell Phone Repairs, Orange
- 【POWER & TEMPERATURE】1800W heat gun with strong power can rapidly heat from 140 ℉ (60 ℃) to temperature of 1112 ℉ (600 ℃). The heat gun has 2 wind speed modes and variable temperature control dial: 1: 140℉-752℉ (60℃-400℃), 300L/min. 2: 140℉-1112℉(60℃-600℃), 500L/min.
- 【MATERIAL & DESIGN】The heat gun is made of ABS plastic, heat-resistant nylon and stainless steel. It is sturdy and durable and weighs only 2.25 pounds. The heat gun is designed with an Ergonomic handle and side bar to prevent accidental touch, with built-in overload protection to ensure safety during use, support the hands free use.
- 【PAY ATTENTION TO COOLING】After each use of the hot air gun, be sure to cool the nozzle. Be aware of scalding caused by the high temperature of the nozzle. We designed the brace and handing ring for easy cooling and storage
- 【WIDE APPLICATION】7 multi-purpose attachments are perfect for shrink and vinyl wrapping, crafts, cell phone repair, paint stripping, rusted bolts removing, frozen pipes heating, heat-shrink PVC tubing, floor tiles replacing, and grill or BBQ preparing.
- 【AFTER-SALE SERVICE】Within 30 days after you purchase it, if you received a heat gun with damages or which does not help you to finish your work, we’d like to send a free new replacement for you or refund. (please keep the package without damaging). We promise a 5-year product warranty and free lifetime customer support for you.
REXBETI 1800W Variable Temperature Heat Gun, 140℉-1210℉(60℃-654℃) High Power Hot Air Gun, Ergonomic Body Design, 3 Nozzle Attachments, Fast Heating In Seconds, No Smoke Issue, Perfect for Home Jobs
- High power & fast heating – with 1800 watts of power, the maximum temperature of Rex022 heat gun can reach near 1210℉.the high-powered turbofans allows for fast heating in seconds, It will be your best hot air gun for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or Floor tiles, loosening rusted bolts and other multiple jobs
- Variable temp control & ol protection – as a professional heat gun, the Rex022 hot air gun can get anywhere from 140℉ to 1210℉. temperatures are controlled by separate dial, which gives you a lot of control.This heat gun is designed to last in the most demanding of work environments.Also equipped with the 4th generation overload protection system, when over heated, it will automatically stop working to protect the heat gun and avoid any other problems
- Low & high fan speeds – fan speeds are important, The more control you have over the fan speed, The more you’ll be able to control the airflow.The REXBETI Rex022 has high and low fan speeds that help control the amount of air flow.The airflow of the II mode is 550L/min, which is more powerful than normal model
- 3 nozzle attachments – no need to buy additional nozzles! Unlike some brand heat gun, we prepared 4 accessories in the box – a glass protector nozzle, reduction nozzle, reflector nozzle and a hand held scraper, which will be the great attachments for multiple jobs
- Extra long power cord & lightweight body – the 5.8 ft power cord is long enough for you to move freely in large work area. REXBETI Rex022 heat gun with lightweight and handy size fit perfectly in your hand and let you do the multiple jobs freely
Mini Hot Air Gun, ZeopoCase Portable Mini Heat Gun for DIY Embossing Shrink Wrapping Drying Paint, 300W Multi Function Electrical Heat Tool
- Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed
- Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
- Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
- The temprature can not be adjusted, but it can reach at about 200°C/390°F within a few seconds abstractly which heat up quickly and works like a charm
- WHAT YOU GET – 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap, 12 month Warranty, [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full product refund, no questions asked and no need to return the product.
This excellent compact electrical heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
FEATURE:
Size: 220*43mm / 8.7*1.7inchs, wire length 91cm/36inchs
Type: Constant temperature
Working temperature: It can reach at about 200°C / 390°F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap
Product Warranty
[QUALITY ASSURANCE] ZeopoCase offer 12 month warranty time for the product.
If you’re not happy for any reason, simply contact us and we’ll give you a full product refund, no questions asked and no need to return the product.
REXBETI 1800W Dual Temperature Heat Gun, 140℉-1210℉(60℃-654℃) High Power Hot Air Gun, Ergonomic Body Design, 2 Nozzle Attachments, Fast Heating In Seconds, No Smoke Issue
- Double powerful heating wire can achieve the temperature of 1210°F, The high-powered turbofans allows for fast heating within 1.5 sec
- The 4th generation overload protection keeps safety use all the time,5 seconds back to work (Most heat gun will back to work about 5-10 minutes)
- High temperature ABS plastic shell. Non-slip long handle offers perfect grip when working with it
- 2 multi-purpose attachments perfect for shrink and vinyl wrapping, heat-shrinking PVC tubing, paint or adhesive removal, soldering and desoldering, heating frozen pipes
- Power cord is long enough for you to move freely in large work area
Conclusion
By our suggestions above, we hope that you can found heating gun for electronics for you.Please don’t forget to share your experience by comment in this post. Thank you!
