seemebag 
Nowadays, there are so many products of heatig cooling relays in the market and you are wondering to choose a best one. You have searched for heatig cooling relays in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heatig cooling relays which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird Temperature Controller 110V Temp Thermostat Digital Control Switch 2 Relay Heating Cooling Output Fahrenheit Centigrade Display NTC Sensor Terrarium Aquarium Reptile ITC1000
- TWO Relays, Switch Between Cooling and Heating Modes
- Temperature Calibrating, Refrigerating control output delay protection.
- Alarm When Temperature Exceeds the Limit or When Sensor Error.
- Fahrenheit and Celsius Display Can Be Choose.
- Control the Temperature by Setting the Temperature Set Value and the Difference Value.
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC）
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x ITC-1000 Temperature controller 110v with 6.67 NTC Sensor
Q ＆ A:
1. Q: How to wire? I can hear the relay inside the unit click, but I can’t get any voltage on the cool or heat terminals.
A: IMPORTENCE: Please don’t forget to wire the Heating and Cooling device to Power supplier and make a circuit.
2. Q: The cooling device doesn’t work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing.
A: The cooling has delay function. If you want to run immediately and don’t need the PT function, you can set PT=0.
KETOTEK Digital Temperature Controller -58~230F AC 110V 220V 10A Thermostat Regulator Heating Cooling Control Relay Egg Incubator Farming
CHENBO(TM)3 Pack 12V DC Digital Cooling/Heating Thermostat Temp Control -50-110 °c Temperature Controller 10A Relay Module With Waterproof Sensor Probe
DZS Elec 3pcs XH-W1209 Micro Temperature Controller Switch DC 12V LED Digital Heating/Cooling Temp Thermostat Relay Module -50 to 110 Degree 10A with Waterproof Sensor Probe
- Compact Size: 48.5x40mm, light weight, convenient to use, easy to install.
- Wide Temperature Control Range: -50 to 110 degree Celsius, High Precision: 0.1 Degree Celsius.
- Use the waterproof sensitive NTC (10K 0.5%) sensor probe as the measurement input.
- Power Supply: DC 12V, low power consumption, Quiescent Current: Less than 35mA, attract current less than 65mA
- Equipped with 0.28″ 3-bit LED nixie tube, bright red color digital display, clear, easy to read.
Product Name: Microcomputer Temperature Control Switch
Product Model: XH-W1209
Product Size: 48.5x40mm
Control Mode: Heating/Cooling
Temperature Range: -50 to 110 Degree Celsius
High Temperature Protection: 0-110 Degree Celsius
Power Voltage: DC 12V
Quiescent Current: Less than 35mA, attract current less than 65mA
Temperature Probe: NTC (10K 0.5%) Water-Proof Sensor
Output: 1 Channel Relay Output, Capacity 10A
Environmental Requirement: -10 to 60 Degree Celsius, Humidity 20% – 85%
Operating Instruction:
1. Connect the power supply and load, displayed the real-time temperature, long press SET 5s to enter main menu.
2. Press SET again to enter P0(working mode) setting, press + – to select H (heating);
3. Press SET back to main menu, press + to set hystersis up to 10, press + to P1 (hystersis) setting;
4. Press SET back to main menu, long press SET to confirm if there is no other special requirements;
5. If need P0-P6 setting, press SET to enter setting, and press + – to set value similar to the above operation, long press SET to confirm after completing.
Attention: When the real-time temperature is below 40 Degree , heater starts to work, when heated to 50 Degree, heater stop working. The hystersis between 50 to 40 Degree is 1.
Package Included:
3x W1209 DC 12V Digital Temperature Controller Switch
Diymore Digital Temperature Controller STC-1000 DC 12V-72V All-Purpose Heating Cooling Thermostat LED Display 2 Relays Output with NTC Sensor Probe
- Mini and light weight design
- large and clear LED display.
- Automatic over temperature alarm
- temperature calibration.
- Wide temperature range (-50-99 °C)
- dual heating and cooling function.
- Control temperature by setting the temperature set value and the different value.
- Refrigerating control output delay protection
- wiring diagram for installation included.
Specification:
Line length: 1m
Product Model: STC1000
Size:75mm*85mm*35mm
Supply Voltage: DC 12~72V
Temperature Range: -50°C~+99°C
Temperature Measurement Accuracy: ±1°C(In the range of -50~+70°C)
Heating and Cooling Mode Setting:
Case1: Control Water Heater
Heating to 65° to stop, the temperature drops back to 50° and heating again.
Step1: Heating mode,Starting Temperature＜Stop Temperature.
Step2: Press and hold the▲button 3 seconds to Start Temperature value flashing. Use▲▼ to set the Starting Temperature to 50°C.
Step3: Press and hold the▼button 3 seconds to Stop Temperature value flashing. Use▲▼ to set the Stop Temperature to 65°C and the setting is completed.
The button does not operate for 5 seconds and automatically returns to the normal display state.
Case2: Control Farm Fan
The fan is ventilated to 26° to stop, the temperature is raised to 30° and the ventilation is started again.
Step1:Cooling mode, Starting Temperature＞Stop Temperature.
Step2: Press and hold the▲button 3 seconds to Start Temperature value flashing. Use▲▼ to set the Starting Temperature to 30°C.
Step3: Press and hold the▼button 3 seconds to Stop Temperature value flashing. Use▲▼ to set the Stop Temperature to 26°C and the setting is completed.
The button does not operate for 5 seconds and automatically returns to the normal display state.
Package Included:
1 x STC-1000 Digital DC12-72V All-Purpose Temperature Controller Thermostat with Probe
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Aube Technologies RC840T-120 Electromechanical Relay with Built In Relay
- Direct replacement for any brand name relay
- Built-in 24 V transformer for easy installation
- Compatible with 24V thermostats with 2-wire connections (R,W) or 3-wire connections (R,W,C)
- Immediate relay activation provides improved temperature control and comfort
- Epoxy-soundproofed relay ensures quiet operation
KETOTEK Digital Temperature ControllerAC 110 220V 10A Thermostat Regulator -50~110C Heating Cooling Control Incubator Relay
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Conclusion
By our suggestions above, we hope that you can found heatig cooling relays for you.Please don’t forget to share your experience by comment in this post. Thank you!
