seemebag 
Nowadays, there are so many products of cooling temperature controller in the market and you are wondering to choose a best one. You have searched for cooling temperature controller in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling temperature controller which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Conclusion
By our suggestions above, we hope that you can found cooling temperature controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
