seemebag 
Nowadays, there are so many products of air heating register square 12 x 12 in the market and you are wondering to choose a best one. You have searched for air heating register square 12 x 12 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings air heating register square 12 x 12 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
12" X 12" Adjustable AIR Supply Diffuser – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75"w X 13.75"h]
- 12″w X 12″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 13.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Steel Construction, No Scuff Powder Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front – Easy Unrestricted Air Flow Deflection For Your HVAC System
12″ X 12″ ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75″w X 13.75″h]
12″w X 12″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 13.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
Magicfly Magnetic Vent Covers, 4 Pack, 12" x 5.5" Ultra Thick Magnet for Vents in Homes, Air Grills, Registers, RVs, HVAC Units, (Not for Ceiling Or Aluminum Vents)
- Useful Must-Have: (4 pack) Magicfly Magnetic Vent Cover is practical for blocking the air from passing through metal vents on wall or floor and reducing noise.
- Economical & Healthy: It helps to save money on your electricity bill by not heating or cooling unused spaces. It prevents strong airflow that blows directly on you, offering more comfortable and healthy environment for you.
- Premium Materials: High quality magnet sheet and PVC surface, safe and non-toxic, won¡¯t do harm to you and your families. Strong magnet ensures long-time uses and it can withstand up to 160 degrees Fahrenheit.
- Easy to Install: Just remove the wrapping paper and stick it to wherever you want. Each pack (Size: 12″ x 5.5″) can be cut for a custom fit. Please measure the size of your needs before trimming.
- Multifunctional: It can be applied on any metal air vents, suitable for HVAC at home, in the office, on RVs and boats. Note: not for ceiling vent applications.
Saba Air Vent Cover Grille – Acrylic Fiberglass 10" x 10" Duct Opening (12" x 12" Overall) White Finish Decorative Register Covers for Walls and Ceilings NOT for Floor USE, Charlotte
- MATERIAL: We use high quality acrylic fiberglass material (Grade A+) which is moisture and heat resistant suitable to cover air vents, ducts or openings all around your house, apartment or office space. The vent covers are manufactured in the USA using high precision laser cut machine allowing us to cut to any shape or size to meet our customers’ needs.
- MEASUREMENTS: Please order by the opening size. Listed product sizes refer to the duct opening measurements, outer dimensions in most cases are 1″ in each direction. The thickness of the material is 1/8″. The back of this grille is flat with no protrusion which makes it very easy to attach to the wall or ceiling without any scratches or sides of the cover hanging around.
- USE: These vent covers are perfect for walls and ceilings, not for floor use. SABA Home Decor offers a luxurious solution to unattractive, stamped-metal grilles and air vent covers that have always been a challenge for modern interior designers.
- INSTALLATION: the instructions are very easy and fast. You can visit our separate page on the website for more details. The installation requires only self adhesive silicone so you can attach the product to the wall or ceiling, no screws or any other hard work is required. On top of that it is maintenance free after installation as no corrosion, rust or mold will be formed on this material.
- PREMIUM LUXURY FINISH AND MODERN CONTEMPO DESIGN forming a very unique piece of interior design. This very popular grille can be found in historic restorations and fine homes throughout America.
SABA Home Decor offers a luxurious solution to unattractive, stamped-metal grilles and air vent covers that have always been a challenge for modern interior designers. Now you have a chance to replace them with our beautiful and high-quality mirror finish air grilles made from acrylic fiberglass (Grade A+). The vent covers are manufactured in the USA using high precision laser cut machine allowing us to cut to any shape or size to meet our customers’ needs. Every home needs an elegant upgrade to add some character and upscale look, and we at Saba Home Décor came up with the perfect solution for this.
Eureka Air High Energy Magnetic Vent Cover – 3 Pack (8" X 15.5")
- Up to 6X stronger than leading competitors!*
- Lower energy cost and make home more comfortable by redirecting air
- Easily trim to your exact register size
- Powerful enough to use for ceiling, wall, or floor vents
- Please test your register with a magnet. This product will only work with steel registers
- will not perform with aluminum, plastic, or wood
The Eureka Air Story
At Eureka Air, we are comprised of a team of aerospace engineers. We spent months testing flexible magnets from across the globe. Unsatisfied with the results, we created our own requirements and found a manufacturer that could produce a magnet to these specifications.
Our Vent Covers
Eureka Air vent covers are optimized. Some magnets are too thin and cannot generate enough pull strength to adhere to the vents. Others are too thick and heavy to be effective on wall and ceiling vents. Eureka Air covers are designed to generate as much pull as some magnets twice the thickness. The covers are also still easily trimmed to fit and they maintain flexibility to follow the contours of the vent.
*Test data from independent lab available upon request.
UnityStar 4-Pack Magnetic Vent Covers, 12 x 5.5 inches Double Thick Magnet for Wall Registers or Floor Air Vents, RV, Home HVAC, AC (Not For Ceiling Vents)
- Double thick magnet sheet magnetically seals the air from passing through metal vents on sidewall or floor and reduces noise. Not for ceiling vent applications.
- Magnetic Air Vent Cover dimension: 12″ (L) x 5.5″ (W), pack of 4. Cuts easily with scissors for a custom fit.
- Lower your energy cost by not heating or cooling unused spaces. Redirect air flow to needed areas for added comfort.
- Compatible with HVAC at home, in the office, on RVs and boats
- withstands up to 160 degrees Fahrenheit
- 30-day customer satisfaction money back guarantee for these UnityStar Air Vent Covers.
Similar items with 4 stars and above
Home Intuition Adjustable Magnetic Heat and Air Deflector for Vents, Sidewall, and Ceiling Registers, 2 Pack
- 5 YEAR MONEY BACK GUARANTEE. You have nothing to worry about because we have got you covered. Our money back guarantee provides you with the comfort you deserve to make sure your money was well spent and the best part is if your not satisfied we’ll return
- WIDE RANGE OF MOVEMENT. We provide you with the ability to extend and retract between 10” – 14” in order to make sure you still have the proper width and fit resulting in maximum effectiveness.
- LONG LASTING and MONEY SAVING. Our heat and cold air deflectors are built from heavy duty plastic and super strong magnets delivering both quality and performance you deserve when making any purchase. An evenly heated or cooled room is one that will save you money and over handling your units making sure you don’t push your HVAC system to a point where it is overworking and can lead to overheating and hefty service call fees.
- SIMPLE CLASSIC DESIGN. A combination of transparent material and low profile design will make sure your home, office, or personal space doesn’t seem to have any odd decorations hanging from your vents allowing you to keep things looking clean and uncluttered
Introduction
The Home Intuition simple yet extremely useful Heat and Cold Air Deflector is the perfect way to keep your room temperature evenly heated or cooled allowing for better airflow and not getting stuck in the seat that gets hit directly by your vents! This Vent deflector works great for 10″-14″ wide in all locations, floor, wall or ceiling. This deflector is used as an attachment to a central heating and cooling system.
Features
The Air Deflector is super easy to install. Simply place the deflector up against a metallic air vent that supports magnets and adjust the width by sliding back and forth. It is made of heavy duty clear plastic and is held in place with magnets so it’s as easy as can be.
Product Satisfaction
Our combination of high grade material and low cost help deliver a product that’s long lasting and dollar friendly. With our product satisfaction guarantee you can shop at ease knowing that well have your back so what are you waiting for? Pick yours up today.
Accord ABSWWH41212 Sidewall/Ceiling Register with 4-Way Design, 12-Inch x 12-Inch(Duct Opening Measurements), White
- Steel construction for sidewall or ceiling application
- 1/2-in spaced fins
- Four-way air deflection with a multi-shutter damper
- The number of louvered columns and mounting holes will vary based on the size of the grille ordered
- Listed product sizes refer to the duct opening measurements, not the register itself
Accord Ventilation model ABSWWH41212 is a white, 12-Inch x 12-Inch(Duct Opening Measurements), sidewall/ceiling register with a 4-way design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.
Similar items with 4 stars and above
12" x 12" 4-WAY SUPPLY GRILLE – DUCT COVER & DIFUSER – LOW NOISE – For Ceiling – With Opposing Damper Blades
- 12″ X 12″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15″ Width X 15″ Height
- High Quality Aluminum Construction, No Scuff Powder-Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, Recessed Screw Holes with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Extruded Ceiling Diffuser, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
12″ X 12″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15″ Width X 15″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
How To Measure A Register Grille:
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Height vs Width
The first number in a register grille size represents the width, the second number represents the height.
Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.
This ceiling diffuser deflector vent cover will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
12” X 12” HG POWER Aluminum Grilles Vents, Air Grilles Duct Cover Vents with 6 Inch Ducting Diameter for Indoor Ceiling Use
- 12” x 12” Size aluminum alloy premium quality material air ventilation cover. Duct diameter with 150 mm / 6 inch
- Special square design of the air grilles duct cover vent, durable, beautiful and environment
- Lightweight product and easy to install for ceiling use.
- No scuff powder-coat durable finish, smooth, shiny, scratch-resistant and waterproof.
- This Air vent cover suits for ceiling use. especially in places where people work and live. such as meeting room, office ,hotel, public places, hospital gym and etc.
Specification:
Material: aluminum alloy;
Size: 12” x 12” ;
Diameter Size: 6 inch/ 150mm;
Color: silver white;
Design: square;
Using: ceiling cover use;
Feature:
1) Modern square design;
2) Quality silver white aluminum alloy material;
3) High temperature resistance;
4) Air vents for Ceiling use;
5) Light weight;
6) Easy to install and control;
7) Waterproof and Dust-proof;
Similar items with 4 stars and above
12"w X 6"h Adjustable AIR Supply Diffuser – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75"w X 7.75"h]
- 12″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Steel Construction, No Scuff Powder Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front – Easy Unrestricted Air Flow Deflection For Your HVAC System
12″w X 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75″w X 7.75″h]
12″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Conclusion
By our suggestions above, we hope that you can found air heating register square 12 x 12 for you.Please don’t forget to share your experience by comment in this post. Thank you!
