Which Is The Best Heating Element And Blower

1 New in Box Blower Motor Unit and a Thermostat Activation Switch. This type of professional grade tangential blower is commonly used to help distribute heat from fireplaces and stoves. Quiet and Efficient. Use it to push heat away from your fireplace or stove and to where it can be enjoyed! Fan + Heater 1350W (whole fireplace 1,500W) 120V Blower fan Size: OD48*L:190mm IR Heater size:L210*35(mm) Temp Switch: 85C / 185F The unit is 10″ wide (from the end of the motor to the tabs on the left), 4″ tall, and 3″ deep. It is small enough to fit where the fan would go on most fireplace units. Simply wire in or add a power cord and you are all set.

Hongso Replacement Fireplace Fan Blower & Heating Element for Twin Star electric fireplace. Fits Twin Star brand electric fireplace and other Wood / Gas Burning Stove or Fireplace. Total Width (Does not include Heating Element) = 9.75″, Depth = 3.73″, Height = 3.23″ Blower fan Size: Diameter 60mm x L:185mm; IR Heater size:L 200*35(mm) ; 1350W, 120V. Motor UL Approved, Durable, Quiet and Efficient, Genuine NEW Factory parts. ATTN: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower.

Hongso Electric Fireplace Blower / Squirrel Fan & Heating Element

➤Fits Heat Surge brand electric fireplace

Total Width (Does not include Heating Element) = 10″, Depth = 3 1/2″, Height = 3″ Blower fan Size: Diameter 48mm x L:190mm; IR Heater size:L 210*35(mm) ; 1350W, 120V

2303 BTU’s / 4606 BTU’s ; Standard Setting Heats a 12′ x 13′ room. Motor UL Approved, Durable, Quiet and Efficient, Easy to install

Note: Please measure the space for installing this blower in your Stove or Fireplace, and compared with the dimension of this blower. If you have any questions or concerns, please email us before ordering

Replacement fireplace fan blower and heater element for amish, heat surge electric fireplaces. This type of professional grade tangential blower is commonly used to help distribute heat from fireplaces and stoves. Use it to push heat away from your fireplace or stove and to where it can be enjoyed! It is small enough to fit where the fan would go on most fireplace units. Simply wire in or add apower cord and you are all set. Easy to install, excellent fit, very quiet running, worked perfectly.

Specifications 

– Fan blower Size: L 10″ x W 3.5″ x H 3″, 

-Heater element size: L 8.27″ x W 1.38″, 1350W, 120V.

Fit Heat Surge brand electric fireplace series: ADL-2000M-X, ADL-2000MX,Roll-N-Glow, Accent, Cozy, Curio insert, HT series, X5, X5A, X5B, X5C, X5C-S,X1, X3, X4.

This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Replacement fireplace fan blower and heater element for twinstar electric fireplace, wood burning stove. This type of professional grade tangential blower is commonly used to help distribute heat from fireplaces and stoves. Use it to push heat away from your fireplace or stove and to where it can be enjoyed! It is small enough to fit where the fan would go on most fireplace units. Simply wire in or add a power cord and you are all set. Easy to install, excellent fit, very quiet running, worked perfectly.

Specifications – Fan blower size: L 9.75″ x W 3.73″ x H 3.23″, Diameter 2.36″ x L 7.28″. Heater element size: L 7.87″ x W 1.38″, 1350W, 120V

Fits Twinstar brand brand electric fireplace series: 28E05, 28E05R, TS-001, 23EF010GAA, 10QI071ARA.

IMPORTANT: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. Any questions or concerns, please email us before ordering.

This listing is for 1 New in Box Blower Motor Unit and a Thermostat Activation Switch. This type of professional grade tangential blower is commonly used to help distribute heat from fireplaces and stoves. Quiet and Efficient. Use it to push heat away from your fireplace or stove and to where it can be enjoyed! Fan + Heater 1350W (whole fireplace 1,500W) 120V Blower fan Size: OD48*L:190mm IR Heater size:L210*35(mm) Temp Switch: 85C / 185F The unit is 10″ wide (from the end of the motor to the tabs on the left), 4″ tall, and 3″ deep. It is small enough to fit where the fan would go on most fireplace units. Simply wire in or add a power cord and you are all set.

Vicool Replacement Fireplace Fan Blower and Heating Element for Heat Surge Electric Fireplace The listing kit is made to fit Heat Surge Electric Fireplace. Includes Electric Fireplace Blower and Heating Element. This type of professional grade tangential blower is commonly used to help distribute heat from fireplaces and stoves. Quiet and Efficient. Use it to push heat away from your fireplace or stove and to where it can be enjoyed! It is small enough to fit where the fan would go on most fireplace units. Simply wire in or add a power cord and you are all set. Blower fan Size: OD48mm*L: 190mm The unit is 10″ wide (from the end of the motor to the tabs on the left), 3″ tall, and 3 1/2″ deep, IR Heater size: L 210*35(mm).

Conclusion

By our suggestions above, we hope that you can found heating element and blower for you.Please don’t forget to share your experience by comment in this post. Thank you!