seemebag 
Nowadays, there are so many products of heat sink and cooling fans in the market and you are wondering to choose a best one. You have searched for heat sink and cooling fans in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heat sink and cooling fans which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Enokay Raspberry Pi 4 Model B Heat Sink Single Cooling Fan RAM Heatsink Set
The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.
1.Fan Designed for Raspberry Pi 4B
2.Not included Raspberry Pi 4 Model B Motherboard
3.The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.
Packing included:
1.Raspberry pi 4B Single Cooling Fan
2.Black Aluminum Heatsink Set for Raspberry Pi 4B
Raspberry Pi 4 Fan, iUniker Raspberry Pi 4 Heatsink Fan Single Fan Cooling Fan and RAM Copper Heatsink for Raspberry Pi 4, Raspberry Pi 4B, Raspberry Pi 4 Model B
- Lower Cost than Dual Fan, Single Fan Version Heatsink Fan
- It Can Compatible with Many Single Board Computer (Just pay attention to the Size of the Heatsink)
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom 3M heat conductive strip can make sure your Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
SPECIFICATION:
– Size:
– Voltage: 5V
– Current: 0.2A
– Power: 1W
– Speed: 7500rpm
– Noise: 29DBA
Package include:
1x Single Cooling Heatsink Fan for CPU with Thermal Tape
3x Heatsinks with Thermal Tape
Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)
- The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+
- It can not work for Raspberry pi zero, because there is no pin header on zero
- Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm
- You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan
- This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
Heatsink
Material: aluminum
Process: oxidation
Size-Large: 14mm * 14mm * 7mm
Size-Small: 9mm * 9mm * 5mm
Applications: Raspberry pi development board and other electronic chip auxiliary cooling
How to use it?
First, clean the surface of the electronic components, to ensure there is without greasy and debris, etc., to keep the surface dry
Second: tear off the protective film which back of the heatsink
At last:Attach the heat sink to the required cooling chip, press the heatsink for 2 or 3 times
Cooling External Fan
Parameters: 5V 0.2A
Size: 30*30*7mm
Stability, air volume, sound small
Weight: 9g
Applicable: for Raspberry Pi 3 2 Model B B+ A
Note: It can not work for Raspberry pi zero, because there is no pin header on zero
Package Included:
2 x large heatsink
2 x small heatsink
2 x cooling fan with screw and nuts
OdiySurveil 3-Pack Aluminium Heat Diffusion Cooling Fin Kit,1PCS 100x40x20mm Heat Radiator Heatsink Cooling Fan,2PCS 50x50x20mm Chipset Heatsink Heat Diffuse Dissipation Cooling Fin
- ★★★★★ Product Name : Cooling Fin
- Material : Aluminium
- ★★★★★ Size : 100mm x 40mm x 20mm / 3.9″ x 1.6″ x 0.8″(L*W*H)
- 50 x 50x 20mm / 2″ x 2″ x 0.8″ (L*W*H)
- ★★★★★ Fins Number : 14(50x50x20mm),11(100x40x20mm)
- Weight :approx. 170g
- ★★★★★ Aluminum heatsink cooling fin, generally used in heat treatment and the cooling IC and electronic component. The fins increase the area of the board and thus provide for greater heat transfer.
- ★★★★★ BRAND: OdiySurveil electronics Brand is a Registered Trademark of BYL LLC. Only OdiySurveil Seller is authorized to sell.
Description:
* 100% NEW & High Quality Warranty.
Material : Aluminum Color : Silver Tone;
Fins Number : 14(50x50x20mm),11(100x40x20mm); Weight :approx. 170g
Overall Size : 50 x 50x 20mm / 2″ x 2″ x 0.8″ (L*W*H) , 100mm x 40mm x 20mm / 3.9″ x 1.6″ x 0.8″
(L*W*H);
Aluminum heatsink cooling fin, generally used in heat treatment and the cooling IC and electronic component.
The fins increase the area of the board and thus provide for greater heat transfer.
Package Included :
1PCS 100x40x20mm Heat Radiator Heatsink Cooling Fan,
2PCS 50x50x20mm Chipset Heatsink Heat Diffuse Dissipation Cooling Fin
MakerFocus 4pcs Raspberry Pi 4B Fan DC Brushless Cooling Fan 3.3V 5V Heatsink Cooler Radiator Connector Separating One-to-Two Interface for Raspberry Pi 4/ Pi 3/3B+ and Pi Zero/Zero W or Other Project
- √ Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √ Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √ Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- √ Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √ Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
4pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
Package Including:
4 * pi fan
16 * nuts M2.5
16 * screw M2.5 * 14mm
Similar items with 4 stars and above
NVMe M.2 SSD Cooler Heatsinks with 20mm Fan Powerful Cooling
- ★Universal Fit: Compatible for desktop computers.Main Body Material: Aluminum alloy, silver plating, anodic oxidation surface treatment. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 12mm
- ★Compatible with NGFF PCIe NVMe M.2 SSD Size: 0.87 x 3.15in. (22 x 80mm), fits for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
- ★Double-layer design, greatly increase the heat dissipation area, 20mm high-performance fan, low noise and no vibration, speed up to 10000rpm, with 10°C – 40°C cooling effect (Varies depending on the environments), improve your computer’s performance, very suitable for game players.
- ★Heat Conductive Material: Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces
- Low viscosity, no damage to the M.2 SSD warranty label.
- ★SATA 5V power supply, 15PIN SATA Power interface supply is stable and simple, versatility, easy to install
★WELCOME TO THE ANGEL MALL★
NVMe M.2 SSD Cooler Heatsinks with 20mm fan powerful cooling（This heatsink only fit for desktop PC. ）
★Features：
➤Apply to 22x80mm size
➤Apply to NVME M.2 SSD with chips on one side and both sides
➤20mm silent fan, 10000 rpm, no speed adjustment
➤15PIN SATA Power interface supply is stable and simple, versatility, easy to install
➤Comprehensive heat dissipation, 10°C – 40°C cooling effect (Varies depending on the environments)
★Compatible with PCIe NVMe M.2 SSD brand and models (Only part of them):
✔Samsung: 850EVO / 860EVO / 960EVO / 970EVO / 950PRO / 960PRO / 970PRO / SM951 / SM961 / PM951 / PM961 / CM871a / PM871 / PM981 / XP941
✔Intel: 600P / 530 / 540S / PRO2500 / Optane Memory Module
✔Kingston: SM2280S3G2 / RBU-SNS8152S3 / KC1000
✔Plextor: M6GV / M7VG / M8PeGN / M8SeGN
✔SanDisk: X300 / X300S / X400 / Z400S / X110 / A400
✔Transcend: MTS800 / MTS820
✔ADATA: SP550 / ASX7000NP / XPG-SX6000 / XPG-SX8000 / XPG GAMMIX S10 / SU800 / AXNS381E
✔Apacer: AST280 / Z280 / AS2280
✔Toshiba: Q200 / XG3 / XG4 / OCZ RD400 / THNSNK / OCZ: RD400
✔Crucial / Micron: MX200 / MX300 / M510 / M600 / 1100
✔WD: Green M.2 / Blue M.2 / Black M.2
✔Corsair: MP500
✔Silicon Power: M55 M.2 2280
✔MyDigitalSSD: BPX 80mm (2280) / BP5e 80mm (2280)
★Package Contents
1x M.2 SSD HeatSink and Back Cover
2x Heat-conducting Silica Gel Pad
1 x Screwdriver
7 x Mounting Screw
2x Wipes
★We have professional R&D team, will continue to launch new products to meet customer needs and, thank you for your supporting!
Similar items with 4 stars and above
youyeetoo Khadas Heat Sink with Cooling Fan for VIM3 SBC Single Board Computer
- Very Easy to Set Up – Compatible with the Latest Khadas VIM3、VIM2 and VIM1
- Comes With Pcs Cooling Fan – For CPU
- The Cooling Fan – The Very Quiet Fan can Cool Down Your Board TEMP
- Unique Design Khadas VIM3 Case – it can make your Pi looks Cooler than others
- Notice: Khadas VIM3 Board is Not Included
youyeetoo Khadas Heat Sink with Cooling Fan for VIM3 SBC Single Board Computer
Nxtop 150x69x36mm Aluminum Heat Radiator Heatsink Cooling Fan Silver Tone 2Pcs
Use Screw to install the heatsink. Screw is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component.
BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin (fan)
Feature
Voltage:5V
2Wire 2Pin
Package:
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
Aluminum Heat Radiator Heatsink Cooling Fan 150x85x12mm Blue Tone
- Made of high quality blue anodized Aluminum , good thermal conductivity.
- Size: Dimension: 5.9 x 3.34 x 0.51 inch / 150 x 85 x 12mm (L*W*H), please make sure that the size of the heat sink fits that of your component.
- This large big aluminum heatsink reduces the risk of hardware failure and power loss due to overheating, more safety.
- Maximize surface area Designed in contact with the cooling air. The 448pcs fins increase the area of the board and thus provide for greater heat transfer.
- Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
* Materials: Aluminum
* Color: blue
* Aluminum Heatsink Size: 5.9 x 3.34 x 0.51inch / 150 x 85 x 12mm (L*W*H)
* Used for: Various mini DC convertercircuit board, LED, Power IC, Transistor etc.
* A heat sink is a passive heat exchangerthat transfers the heat generated by an electronic or a mechanical device,thereby allowing regulation of the device’s temperature at optimal levels.
* Heat sinks are used with high-powersemiconductor devices such as power transistors and optoelectronics such aslight emitting diodes (LEDs), where the heat dissipation ability of thecomponent itself is insufficient to moderate its temperature.
* Improve the environment (temperaturearound the device, as well as the flow rate of the air)
* Note:
1. Please check the specification table andmake sure that the size of the heatsink fits that of your component. Thank You!
2. Please allow 1-3mm error due to manualmeasurement. Thanks for your understanding.
Weight: 5.57 oz / 158 gr per piece
Conclusion
By our suggestions above, we hope that you can found heat sink and cooling fans for you.Please don’t forget to share your experience by comment in this post. Thank you!
