Which Is The Best 4X4 Cooling Fan
Nowadays, there are so many products of 4×4 cooling fan in the market and you are wondering to choose a best one. You have searched for 4×4 cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 4×4 cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
AC Infinity AXIAL LS1238, Quiet Muffin Fan, 120V AC 120mm x 38mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
- Designed for projects that requires cooling or ventilation
- or as a replacement fan for various products.
- Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Low Speed: Has a lower noise and airflow rating than high speed models of the same size.
- 120 x 120 x 38 mm (4.7 x 4.7 x 1.5 in.) | 100 to 125V AC | Airflow: 62 CFM | Noise: 32 dBA | Speed: 1800 RPM
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. The AC Infinity axial fan is UL recognized under certificate E503903, and also CE and RoHS certified.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic which have a high resistance to flammability Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
AC Infinity AXIAL 1225, Quiet Muffin Fan, 120V AC 120mm x 25mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)
Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.
Specifications:
– Fan Size: 30x30x7.5 mm (LxWxH)
– Wire Length: 2.6 inches (66mm)
– Connector: One-to-Two pin
– Color: Black
– Bearing Type: Hypro Bearing
– Operating Voltage: DC 3.3V – 5V
– Start up Voltage: DC 3V
– Current: 120 mA
– Speed: 5000RPM±15%
– Airflow: 1.79CFM
– Noise Level: 15.92dBA
– Life Time: 30,000 hours
Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.
Similar items with 4 stars and above
GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range:5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Similar items with 4 stars and above
GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (4-Pack)
- Used for Raspberry Pi 4, 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 4x Cooling Fans, 4x Screw Sets, 12x Heatsinks for Raspberry Pi 3B+, 16x Heatsinks for Raspberry Pi 4 Model B
- NOTE: Raspberry Pi Not Included
Descriptions:
It used for Raspberry Pi 4 Model B,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
4x Cooling Fan
4x Screw Set
12x Heatsinks for Raspberry Pi 3 Model B+
16x Heatsinks for Raspberry Pi 4 Model B
GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 1x Cooling Fan, 1x Screw Set, 3x Heatsinks for raspberry pi 3B+/3B/2B/B+,4x Heatsinks for raspberry pi 4 Model B
- NOTE: Raspberry Pi Not Included
Descriptions:
It used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
1x Cooling Fan
1x Screw Set
3x Heatsinks for raspberry pi 3B+/3B/2B/B+
4x Heatsinks for raspberry pi 4 Model B
DEEPCOOL RF120M 5IN1, 5x120mm RGB PWM Fans with 2 Fan Hubs, Compatible with ASUS Aura Sync, Controlled by Motherboard with 12V 4-pin RGB Header, No Wired Controller
- RGB plugs of these fans can be daisy chained and the last one can be plugged into motherboard 12V 4-pin RGB header. No cable controller
- Multiple control modes: breathing, static state, or multi-color cycling
- Support up to 6pcs of DEEPCOOL RGB devices, including: GAMMAXX GT/GT BK, Captain EX RGB, RGB 200EX, and so on
- Intelligent PWM functions to meet system cooling demands
- Fan Speed: 500~1500 RPM±10%. Max. Air Flow: 56.5 CFM. Noise: ≤27 dB(A). Fan Connector: 4-pin PWM. RGB LED Connector: 4-pin (+12V-G-R-B)
GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range:5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Geekworm DC 5V 4007 40MM 4CM 40x40x7MM Cooling Fan for NVIDIA Jetson Nano Developer Kit and Jetson Nano Metal Case/T100 Case/T300 Case
- Note: This cooling fan does not support PWM and speed feedback
- the fan will turn after power-on
- The NVIDIA Jetson Nano Developer Kit is not included in the packing list.
- This 5V cooling fan supports to install in Geekworm NVIDIA Jetson Nano Metal Case (ASIN: B07RRRX121)
- T300 Metal Case(ASIN: B07W7CNSR8), T100 Metal Case(ASIN: B07VYKRJQY)
- Dimensions: 40x40x7mm
- Connector:2.54 dupont connector-2P
- Rated Voltage: DC:5V
- Rated Current: 0.05A
- Cable Lenght: 6.5cm(2.56inch)
- This is an ultra-quiet cooling fan for NVIDIA Jetson Nano Developer Kit
- it with a 2.54 DuPont connector which is easy to insert. About how the install the fan, please refer to the photo.
Noctua NF-B9 redux-1600 PWM, High Performance Cooling Fan, 4-Pin, 1600 RPM (92mm, Grey)
- High performance cooling fan, 92x92x25 mm, 12 V, 4-pin PWM, max. 1600 RPM, max. 17.6 dB(A), >
- 150,000 h MTTF
- Renowned NF-B9 high-end 92x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Highly optimised low-noise design with outstanding quietness of operation, static pressure and airflow (CFM), ideal for chassis ventilation, cooling fan replacement for NAS and other devices, etc.
- 1600rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
Conclusion
By our suggestions above, we hope that you can found 4×4 cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!