Best Titan X Pascal Cooling

The world-renowned manufacturer, Alphacool, offers the Eisblock GPX a very noble and high-quality full cover water cooler for your graphics card. The Eisblock GPX is available in two versions; An eye-catching version with a plexiglass window with RGB lighting to really show off or a simple but elegant version made of acetal. Both coolers are based on an identical copper heat sink, which is completely nickel-plated. The surface area where the water flows is very large, so that all components that give off heat are actively cooled with water which increases performance. The 35 fins of the cooler are only 0.6 mm thick and cover even large GPUs completely. The large cooling surface is also ideal for graphics cards with HBM memory. Backplates for both cooler variants are included, but they differ significantly. The acetal version uses a classic backplate coated with fins for better cooling. The plexi version of the Eisblock GPX water cooler uses a smooth backplate, which together with the cooler encloses the entire PCB. This makes the cooler and graphics card look like a single unit rather than a front and back plate. The SLI connector on Nvidia graphics cards is protected by a screwed cap, which can be removed if necessary. The optical highlight of the Plexi variant, besides the very large window, of course also the complete and integrated RGB lighting. This is compatible with ASUS Aurora Sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion or MSI Mystic. But pay attention to the connection on your mainboard. You may need a Male-to-Female adapter for some motherboards. With the Alphacool EisBlock GPX full cover water cooler for your graphics card you get a high-quality cooler with excellent cooling performance. You have the choice between a simple but noble black acetal version or a striking, wonderfully illuminated and chic plexi version with a large viewing window. Compatible with Nvidia Titan X (Pascal) / 1080Ti Founder’s Edition GPU cards.

Model: 11568

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

An RGB upgrade kit for existing EK-FC GeForce GTX FE high-performance full-cover water blocks that fit NVIDIA GeForce GTX and Titan X Pascal based graphics cards. The upgrade kit includes a 4-pin 12V RGB LED strip. The kit enables a quick and easy upgrade of the existing EK-FC GeForce GTX FE to the latest RGB version of the full-cover water block. The kit includes all necessary parts to perform the upgrade, including a fresh set of screws, thermal pads, O-rings, Allen keys, new RGB ready plexi top, aluminum cover with an already installed RGB strip and a fresh EK badge. The only things reused from the previous block are the nickel plated cold plate and the terminal. To avoid cracking your brand new RGB plexi top, use only 0.5 – 0.7 Nm of torque force on the terminal screws. Do not use excessive force when re-tightening the screws as the plexi top might crack or the threads might get stripped thus rendering the water block useless. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. Model: 3830046996848.

Powered by GeForce GTX 1080 Ti and integrated with 11GB GDDR5X 352-bit memory interface. Featuring WINDFORCE Water block with advanced copper back plate cooling.

Thermaltake Pacific v-gtx 10 series founders Edition transparent water block is a full cover water block including an aluminum alloy back plate. Compatible with NVIDIA GeForce GTX 1080/1070 fe models, deliver the ultimate in cooling performance. Featuring 0.5mm internal fin construction, the Pacific v-gtx 10 series is manufactured with cnc machined copper base, nickel plating for ideal protection and supporting G1/4 threaded fittings. Included hardware supports users for easy installation. See the true power of liquid cooling with the Thermaltake Pacific GTX 10 series GPU water block.

Compatible List (Including but not limited to the following models)
Founders GTX 1080Ti
Founders GTX 1080
Founders Titan X Pascal
LeadTek Quadro M6000 12GB
Founders GTX 1070
EVGA GTX1080Ti SC2 GAMING

nVIDIA 12GB Titan X Pascal DVI HDMI 3x Displayport PCI Express 3.0 x16 Graphics Card 900-1G611-2500-000

Take on today’s challenging, graphics-intensive games without missing a beat. The GeForce GTX 1070 graphics card delivers the incredible speed and power of NVIDIA Pascal-the most advanced GPU ever created-for truly Revolutionary gaming and vr performance. This advanced graphics card is created with ultra-fast finfet technology and supports DirectX 12 features to deliver fast, smooth, power-efficient gaming experiences. Plus, it balances sleek angles and thermals for a cooler design-both inside and out. Get up to 3x faster performance in AAA and immersive vr ready games than with previous-generation GPU. And bring more realism to every game with NVIDIA game works technologies that offer a true cinematic experience and amazing new image-capture to share your game.

Conclusion

By our suggestions above, we hope that you can found titan x pascal cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!