seemebag 
Nowadays, there are so many products of aluminium heating blcok in the market and you are wondering to choose a best one. You have searched for aluminium heating blcok in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings aluminium heating blcok which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Creality Original 3D Printer Extruder Assembled MK8 Hot End Kit for CR-7,CR-8 CR-10 CR-10S S4 S5 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
Benchmark Scientific BSW50 Aluminum Dry Bath Heating Block for Digital Dry Bath Incubator, 5 x 50mL Centrifuge Tubes Capacity
Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)
- High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5.
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
- MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W.
- Tip of the nozzle, aluminum heating block, throat pipe .
- Suitable For Creality 3D CR-10 Series.
Installation type: External thread connection
Application: Creality 3D printers CR-10 CR-10S S4 S5
Nozzle size: 0.4mm
Cable length: 1.2m
Heating Tube: 12V 40W
Operating temperature range: -40~+260°C (-40~+500°F)
Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
Aluminum block size: approx. 20 x 20 x 10mm
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
BZ 3D CR-10 Hotend Assembly, 12V 40W MK8 Extruder Original Replacement with Aluminum Heating Block 1.75mm, 0.4mm Nozzle for CR10/ CR-10S/ CR-10S400/ CR-10S500 (CR-10 Series Hot End 12V40W)
- ★This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
- ★High quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
- ★MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge 12V 40W.
- ★Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament
- ★BZ 3D is committed to providing you with the best service!
Spec:
– Installation type: External thread connection
– Application: Creality 3D printers CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x MK8 Silicone Sock
1x 1.75mm 0.4mm Brass Nozzle
Please note:
Due to light and screen difference, the color may be slightly different from the pictures.
Please allow 1-5mm deviation due to manual measurement.
Ender 3 Hotend 3D Printer Extruder Assembled MK8 Hot End Kit for Ender 3/Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
- 100% Creality 3D original and high quality 3D printer accessories
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro 3d printer
- Tip of the nozzle, Aluminum Heating block, Throat Pipe (Built-in Teflon)
- MK8 extruder hot end kit with thermistor and heater,24V 40W
- Thermistor and heater cable length: 1M
Specification:
Installation type: External thread connection
Application: Creality 3D printer ENDER 3
Nozzle size: 0.4mm
Cable length: 1M
Heating Tube: 24V 40W Operating temperature range: -40~+260°C (-40~+500°F)
Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
Aluminum block size: approx. 20 x 20 x 10mm
Package Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mmM Brass Nozzle
►This Kit NOT include the instruction manual, we need to DIY 🙂
YOTINO 10Pcs 3mm Thick Heating Block Cotton and Aluminum Heater Block for MK7 MK8 Makerbot 3D Printer Hotend Nozzle
- 【Value Pack】5 Pcs Aluminum Heater Blocks, 10Pcs 3mm thick 3D printer heating block cottons.
- 【Aluminum Heating Block】M6 heating block: 20 * 20 * 10mm, Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
- 【Heating Block Cotton】Size:20 * 70 * 3mm. Resistance to thermal shock, low thermal conductivity and thermal capacity,saving power and energy. Better printing effect with this 3d printer heat insulation cotton.
- 【Perfect Compatibility】These heating aluminum blocks are suitable for MK7 MK8 Makerbot 3D Printer structure, works with extruder nozzle throat & heat-insulated cotton.
- 【Note】The thermal insulation cotton does not have the pre-punched holes, you can cut to the appropriate size and punch holes on the cotton according to your need.
The key parts of the 3D printer – Heated aluminum block insulation, the benefit is the internal temperature changes gently, while saving power, to achieve energy saving effect.
Specification:
Material: Aluminum
Heater block Dimension: 20*20*10 mm
Heat insulation cotton Dimension: 70*20*3 mm
Inner hole for set screw: M6 and M3
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Package Included:
5 x Aluminum Heater Block
10 x 3D printer heating block cottons
Please kindly Note:
The heat insulation cotton Does Not have the pre-punched holes, it’s easy to bore a hole.
TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit
- 100% TRONXY Orginal MK8 Full Set Hotend Kit
- Suitable For TRONXY XY-3 Seriers 3D Printer
- Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
- MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W
- Thermistor and heater cable length: 1.2 m ,Feed tube:50cm
Product description
Products Name： Assembled MK8 Extruder Hotend Kit
Brand: TRONXY
Usage for XY-3
Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 31mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1.2 M
Package Included:
1x Assembled MK8 Extruder Hotend Kit
MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle
- 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer
- This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament
- With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect.
Note: These Extruder Head Sprinkler Kit Suitable for Creality CR-10 CR-10S S4 S5 3D Printer.
Specification:
Nozzle size: 0.4mm
Cable length: 1.2m
Heating Tube: 12V 40W
Throat length: 52mm
Aluminum block size: approx. 20 x 20 x 10mm
Material: Aluminum+Stainless Steel+Brass
Operating temperature range: -40~+260°C (-40~+500°F)
Thermistor and heater cable length: 1M
Installation type: External thread connection
Application: Creality 3D printer CR10 Series Hotend
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mmM Brass Nozzle
Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)
- Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer
- Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W
- Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament
Benchmark Scientific BSW1516 Aluminum Dry Bath Heating Block for Digital Dry Bath Incubator, 12 x 15mm Or 16mm Test Tube Capacity
Conclusion
By our suggestions above, we hope that you can found aluminium heating blcok for you.Please don’t forget to share your experience by comment in this post. Thank you!
