Top 10 Drill Stand For Electric Drill

Features:

Depth gauge
Plastic collar insert
Mounting Holes
Allen key & holder – for adjustment

Specification:
Type: Iron Bottom Bracket
Min- Max Clamp : 38-43mm（1.48” or 1.7”）
Main Rod : 25*400mm
Size : 400*155*155mm
Drilling depth: Up to 60mm
Base: Cast Iron Base
Quantity: 1x Drill Bracket (electric drill in the picture is NOT included)

Assembly
Place the base on a level floor,Place the column on the base as deeply as use the hex key M8 to tight the two pieces hex bolts on the side of base.(These are 4 holes on the base on the bench)
Clamp Drill Machine

Put the Electric Drill machine or Die Grinder into the clamp,according to the size of neck of the machine use different thickness of brush,and use the hex key to tight the clamp lock bolt 8.
Screw the Handle(20) to the feed shaft 21and tighten it.
And try to press some times to check the head sliding need,add some grease on the sliding slot and adjust the 3pcs screw 14 on the sliding sporter.

Adjustment of height of Head

According to the workpiece height,Up or down the head assembly,and tight the head lock bolts 9 by hex key.
(unplug the drill before any adjustment of this stand)

Depth Stop

Adjust the height of Point clamp 2 to control the drill Max travel for this stand is 60mm.
Adjust the head to bevel drilling and milling. Loosen the screws 24 between Colum and the Head to desired position,and tighten the screws.adjustment angle is 90 degree.
Trial running machine before operation trial runs machine no loading before any operation.

Warm Reminding:

Before operation,please be advised that your drill and our drill press stand are all assembled securely without no loosen.

This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
Features:
Infinite speed selection within the machine\’s six speed ranges(0-2800r/min).
Aluminum alloy base.
Gear drive without belt design, power strong.
Power-off switch for added safety.
Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
Specifications:
Plug: US (optional)

Spindle Speed: 0-2800r/min
Drill Clamping Diameter: 1-13mm / 0.04-0.51in
Input Power: 710W
Spindle Travel: 60mm / 2.36in
Voltage: 110-220V, 50-60Hz
Drill Capacity: Woods: Ï30mm
Iron: Ï8mm
Working Radius: 110mm / 4.33in
Material: aluminum alloy
Item Weight: 6000g / 12.22b
Package Weight: 6100g / 12.36lb
Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in
Note:
Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.
The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.
Package List:
1 * Bench Drill
1 * English Manual

Drill stand with cast iron base for vertical drilling using a hand drill. Supplied with drill vice which mounts onto the base to secure the workpiece. Features a preset depth control and stop for drilling depths of up to 60mm, ideal for accurate and repetitive drilling. For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without. Drill vice features a quick jaw release feature to allow fast and easy adjustment to suit the workpiece.

You can use our grinder holder bench for, any DIY/ hobby work, a workshop, small repairs, model makers, woodwork, jewellery, general use overall. You can use it in your family or small factory

1. Easy to Attach to anywhere there is furniture including tables, desks and workbenches
2. 360° Rotating Head with 90° pivot to make sure your project is exactly where you need it
4. Double switch for more opening distance to adapt different size of electric drill
5. High-Grade Materials provide strength and reliability

Specification:
Color :Silver
Grinder Holder Opening Distance: 35-43mm
Weight: 590g
Can Clamp The Thickness Of The Object: 1-53mm

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

Features:
– Suitable for most drills and power tools.
– Metal materials are stable and safe
– Special link clamps for more reliable clamping.
– The shaft can be mounted on the drill of electric drills, cut tiles, wood, metal polishing, etc.
– 17pcs tools include: drill guard, cutting seat, stone chip, sticky disk, grinding wheel, saw blade, metal slice, spanner shaft, sandpaper
– Type: Electric Drill Cutting Seat Conversion Accessories
– Functions: Cutting, grinding, cutting tiles, metal polishing, metal cutting, wood cutting, polishing

Specifications:
– 1pcs electric drill protective cover
– 1pcs 13mm electric drill cutting seat
– 1pcs alloy slice
– 1pcs metal cutting sheet
– 1pcs stone cutting sheet
– 1pcs thick sand wheel
– 1pcs sticky disc
– 5pcs sandpaper
– 5pcs electric drill conversion accessories

Package Include:

1 x 17pcs/set Electric Drill Cutting Seat Conversion Tool Accessories

Specifications:

Features:
– Made of metal, durable, practical and long-term use.
– Cutting speed, convenience, stability, safety.
– Suitable for electric drills with a chuck diameter of less than 10mm to meet your needs.
– Suitable for cutting, grinding, polishing.
Type: Electric drill cutting seat
Material: Metal

Package Include:

1 x Electric Drill Cutting Seat
2 x Wrenches
2 x Gaskets Electric Drill Cutting Seat Stand Polishing Grinding Machine Bracket Table Angle Grinder Bracket Holder Converter Wrench Set Kit

Specifications:

Features:
– Made of metal, durable, practical and long-term use
– Cutting is convenient, stable and safe
– 13mm drills seat can meet your needs
– Suitable for cutting, grinding
Type: Electric drill cutting seat
Material: Metal

Package Include:

1 x Electric Drill Cutting Seat
2 x Wrenches
2 x Gaskets

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Drill Stand For Electric Drill, eg:

• What are Top 10 Drill Stand For Electric Drill for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Drill Stand For Electric Drill to buy?
• What are Top Rated Drill Stand For Electric Drill to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Drill Stand For Electric Drill?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Drill Stand For Electric Drill.
• Before deciding to buy any Drill Stand For Electric Drill, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Drill Stand For Electric Drill and What you should consider when buying the Drill Stand For Electric Drill and Where to Buy or Purchase the Drill Stand For Electric Drill. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Drill Stand For Electric Drill of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Drill Stand For Electric Drill.