The 10 Best 3M Organic Vaporacid Gasp100

3M cartridge/filter 60923, organic vapor/acid gas/P100 when properly fitted on 3M half & full face pieces 6000 series and 3M half & full face pieces 7000 series with bayonet style cartridge holders, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide or hydrogen fluoride & particulates at concentrations up to 10 times the permissible exposure limit (PEL) with half face pieces or 50 times PEL with full face pieces.

Product Description

NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

NIOSH approved for certain organic vapors, acid gases and particulates. 3M recommended for use against radioiodine or methyl bromide. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

From the Manufacturer

The 3M Organic Vapor/Acid Gas Cartridge/Filter 60928 P100 is NIOSH approved to provide protection against certain organic vapors, acid gases and particulates in a variety of environments. While NIOSH does not have a test procedure to certify air purifying filters against radioiodine or methyl bromide, this combination cartridge/filter is recommended by 3M for use against radioiodine or methyl bromide at ambient concentrations up to 5 ppm for up to one 8-hour work shift. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH).

This organic vapor/acid gas cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, and non-oil and oil particulates. 3M recommends it for use against radioiodine or methyl bromide. The cartridge/filter has been assigned the color code “Magenta/ Yellow” in the NIOSH system.

Breathing organic vapors, acid gases, and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, and particulates. 3M recommends this cartridge filter for use against radioiodine or methyl bromide, two substances for which NIOSH does not have a standard.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection, eyewear, hard hats, air and noise-monitoring devices, welding shields, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

The Elipse mask range, designed and produced in the UK by GVS, represents an important innovation in the respiratory safety sector. Elipse is among the lightest in it’s category, thanks to the ergonomic shape which allow the operator a wide field of vision, and means they can be easily worn with glasses, helmets and headphones. The Elipse OV/AG-P100 mask carries the highest classification for a particulate filter combined with protection against organic vapors, acid gas and fine dust. The P100 element achieves 99. 98% filtration at 0. 04 micron. GVS OVAG-P100 mask is perfect for everyday applications, such as commercial construction through to the more demanding environments of metalworking, welding, paint spraying, chemical handling and stonemasonry. With OV/AG-P100 filters ready fitted, you haven’t got to worry about buying filters separately, and when the time comes, replacement filters are available. Slim filter design provides a clear line of sight so you can see what your hands are doing. The product is also compatible with eyewear and face shields.

NIOSH approved against certain organic vapors and acid gases. Use in a variety of applications, including pharmaceutical, petrochemical, utilities, aluminum reduction, chemical manufacturing, laboratories, and pulp and paper.

Use with 3M Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. When properly selected, cartridges and filters help provide protection from a variety of gases, vapors and particulate hazards. *Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors. **Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases. ***3M recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone. ****OSHA regulations require gas proof goggles be worn with half facepiece respirators when used against formaldehyde. Only 3M filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M 5000 Series Respirators. Cartridges on 5000 Series Respirators cannot be replaced. The 3M Filter Adapter 502 is required for use of the 2000 Series and 7093 filters with the 5000 Series Respirators and 6000 Series Cartridges. The 3M Filter Retainer 501 is required for use of the 5N11 and 5P71 prefilters with the 5000 Series Respirators. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Description

Use with 3M Filters 2000 Series, 3M Filter 7093 P100, 3M Cartridges 6000 Series, or 3M Dual Airline Systems against a variety of gases, vapours and particulate hazards according to NIOSH approvals. Reliable, convenient, compatible respiratory protection: The 3M Full Facepiece Reusable Respirator 6000 Series offers versatility for many envrionments and applications and helps provide respiratory protection against a wide variety of gases and vapors when used with approved catridges and filters. For use with 3M Cartridges 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvalsWhen properly fitted and used with approved 3M Cartridges and Filters, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the Permissible Exposure Limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH).

From the Manufacturer

3M&#8482 Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants while still allowing for a wide field of view and wearer comfort. The large lens provides a panoramic field of view, allowing the worker to see better. An improved field of view can help increase both safety and productivity. All sizes of this lightweight facepiece weigh 2 pounds or less, which enhances comfort and promotes better worker compliance in wearing respiratory protection. This versatile respiratory protection facepiece works with numerous 3M particulate filters, gas/vapor cartridges and supplied air respirator systems, allowing for specialized use with multiple applications (filters, cartridges and supplied air systems sold separately).

 

Wide field of view – cartridge shown sold separately view larger

Curved lens offers peripheral viewing view larger

Rear view showing comfortable silicone faceseal view larger

Cool and comfortable breathing
This reusable respirator comes with a 3M Cool Flow&#8482 valve. This proprietary valve is designed to release hot, humid exhaled breath quickly, helping to prevent unpleasant build-up of heat inside the facepiece. Respirators with Cool Flow valves are ideal for long periods of wear, especially where conditions are hot, humid, or physically demanding.

 

A versatile respirator for many applications and industries
Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

 

Meets industry recognized government standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce inhalation of certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

 

Protects the health of workers
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable to wear.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M Full Facepiece Reusable Respirator 6000 Series
	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Organic Vapor Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100	3M Mercury Vapor Chlorine Gas Cartridge/Filter P100	3M Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

This organic vapor cartridge/P100 filter can be used for a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. Swept-back design offers enhanced comfort and visibility. When properly fitted, helps provide respiratory protection from certain organic vapors as well as non-oil and oil particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face pieces or 50 times PEL with full face pieces.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m® organic vapor/acid gas/p100, eg:

• What are Top 10 3m® organic vapor/acid gas/p100 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m® organic vapor/acid gas/p100 to buy?
• What are Top Rated 3m® organic vapor/acid gas/p100 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m® organic vapor/acid gas/p100?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m® organic vapor/acid gas/p100.
• Before deciding to buy any 3m® organic vapor/acid gas/p100, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m® organic vapor/acid gas/p100 and What you should consider when buying the 3m® organic vapor/acid gas/p100 and Where to Buy or Purchase the 3m® organic vapor/acid gas/p100. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m® organic vapor/acid gas/p100 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m® organic vapor/acid gas/p100.

Conclusion

By our suggestions above, we hope that you can found 3m® organic vapor/acid gas/p100 for you.Please don’t forget to share your experience by comment in this post. Thank you!