The 9 Best Regal Ware Cookware Replacement Parts

These are replacement handles for newer era (post 1968) Revere Ware pots and Dutch ovens (the ones with one screw per handle that screw directly at a 90 degree angle into the side of the pot). These handles are made for Revere Ware pots made in the last few decades that have handles that look the same, and will not fit any other model of Revere Ware pots, or pots from any other maker. These parts are newly manufactured and are made to look and work just like original Revere Ware pot handles.

These handles are not general replacement pot handles.

Material: Bakelite, stainless steel Includes:

Included: Each order includes two handles, enough for one pot.

Measurements: Approximately 3.0 in (75.5 mm) x 1.25 (32 mm) x 1.5 in in (38 mm)

Fits: Newer era pots and Dutch ovens that use a single screw only, that screws at a 90 degree angle into a bracket on the side of the pot. If your pot handles look like these, they should fit.

Replaces: The original Revere part number for this part was 36134.

Part Notes: The screws included with these handles are Phillips head, not slotted like some of the original Revere Ware pot handle screws were. Because the original slot head screws strip very easily, we consider this an improvement.

Bakelite notes: Because Bakelite is somewhat brittle, over tightening can cause the Bakelite to crack. Use caution when tightening.

Use and care: These handles (and Bakelite in general) are not oven-safe and repeated washing in a dishwasher will dull the surface of the Bakelite.

Use care to not expose the handles to open flame buy turning a gas flame on too high as it will case the Bakelite to smoke and emit a bad odor, and possibly crack. Bakelite in general is not safe to expose to an open flame.

Brand new replacement handle for the vintage 1950s-1990s Amway Queen Cookware waterless stainless steel sauce pans and chicken fryer/skillet. This replacement handle is a non-OEM generic product designed and engineered in the United States by nunuware. It is made with high quality phenolic plastic, commonly known as bakelite.
Handle length is approximately 6 inch long. These handle also fit some vintage Regal Ware West Bend waterless stainless steel cookware as long as you have the round mounting bracket like the one in image #4 AND straight side (will not work if the side is slanted like a wok). Customers confirm the brands of their cookware set that can use this replacement long handle include Flavorite, Emdeko, Duncan Hines, Seal-O-matic, Society, Wonder Ware, Dine Rite, Colonial Ware, Camelot, Jewel Tea Company and Prudential Ware. For other brand cookware, please make sure the connector on the pot is as seen in image #4.

These handles WILL NOT FIT Westminster or Royal Queen Cookware by Regal Ware or Queens Choice by Vollrath, Saladmaster.

Want to keep your cookware looking and functioning like new? The Fitz-All Replacement Pan Handle is perfect for replacing lost or broken handles on cookware and appliances that require a longer handle. Typical applications include fry pans, sauce pans, skillets, omelet pans, griddles, sauté pans, and more. Each handle comes complete with a rustproof aluminum flame guard and screw. The handle is heat-resistant and dishwasher safe, made of plastic with a glossy black finish, which will complement the look of any cookware. The handle is ridged for easy, safe gripping, even with wet hands! For simple storage, a handy hole allows cookware to be hung, if desired. Keep your cookware looking brand new.

Want to keep your cookware looking and functioning like new? The Fitz-All Pot Handles are perfect for replacing lost or broken side handles on most round cookware between 6 inch and 11 inch diameter that use short handles. Typical applications include sauce pots, stew pots, Dutch ovens, canning kettles and pressure cookers. They are also used on some appliances, including slow cookers and coffee urns. With this set, you’ll receive two dishwasher safe handles and two rustproof aluminum screws. Heat-generating applications are no problem as the handles are made of our high heat-resistant plastic material. Their glossy black finish will complement any kitchen, and they’re ridged for easy, safe gripping–even with wet hands. Keep your cookware and home appliances looking brand new!

WEST BEND SENSA-TEMP HEAT CONTROL WB 1 CONTROL Stamped on back: 1500 WATTS 110-120 VOLTS AC ONLY DO NOT IMMERSE IN WATER E78229-HMD2W WB # 1 CONTROL MADE IN JAPAN. Quick reference temperature guide settings on front of face of control: OFF, WARM, SIMMER, 225 up to 425 degrees. Quick start temp guide on front of dial: EGGS, FRIED…250, BACON…300, SAUSAGE…300, HAM SLICE…325, HAMBURGERS…325, FRENCH TOAST…350, PANCAKES…350, GRILLED SANDWICHES…375. Stainless metal Probe length is: appx. 2 ¼” inches, contact holes measure across – center of one hole to the center of the other hole will measure appx. 1 5/8″ inches apart. Controller dimensions: Appx. 3 5/8” inches long by 2 1/8” inches wide by 5/8” inch thick (high) at the front of the controller. Cord length: is appx. 32” inches long not including the heat controller or the plug in at the end. This West Bend “Sensa-Temp” Heat Control model is no longer being made for many years by West Bend – it is now a discontinued item from production. The WB # 1 Model 1500 Watt Heat Control will fit the following type small appliances: Vintage West Bend Aluminum NO STICK Skillets both square and oblong models, Vintage Miracle Maid / Lektro Maid Skillets. Also the following skillets made by West Bend and Regal Ware: Lifetime, Classica, Cordon Bleu, Health Craft, Kitchen Kraft, Lustre Craft, Regal Society, Rena Ware, Royal Prestige, Saladmaster, Townecraft, LIQUID CORE and WEBALCO Electric Oil Core Stainless Steel Skillets. PLEASE COMPARE YOUR CURRENT HEAT CONTROLLER WITH THE PHOTO AND THE STAMPING ON THE BACK OF THIS CONTROLLER – TO MAKE SURE THIS IS YOUR IDENTICAL REPLACEMENT NEEDED FOR YOUR SMALL APPLIANCE. Your appliance may also be stamped on the bottom that it requires a WB # 1 Heat Control – 1500 WATTS and it may also be indicated in the owner’s manual that it uses a WB # 1 Control.

Replacement long handle for use on vintage Regal Ware cookware that has a round mounting bracket like the one in photo AND straight sides (will not work if the side is slanted like a wok).

BRAND NEW 7” inch LONG BLACK REPLACEMENT HANDLE fits the Vintage West Bend Regal Ware DUNCAN HINES Stainless Steel Cookware pans both saucepan or the skillet fry pan. This handle measures appx. 7″ inches long across the top end to end, includes the stainless steel flame guard and matching 1″ bolt, bolt diameter is 15/64 or 5.95mm. Opening at end of handle is appx. 1/2″ square to fit over the welded nut mount on the side of your cooking utensil (see photos). Weight of handle is just under a half pound (5.7 ounces). This 7″ replacement handle will fit many of the vintage and newer brands of cookware that was made by West Bend Regal Ware. Offered only by third party sellers – see their photos and description for reference of the type / style of handle and the weld mount and what it would look like on the side of your existing pan to make sure you are purchasing the correct replacement handle for your cookware.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy regal ware cookware replacement parts, eg:

• What are Top 10 regal ware cookware replacement parts for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 regal ware cookware replacement parts to buy?
• What are Top Rated regal ware cookware replacement parts to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) regal ware cookware replacement parts?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for regal ware cookware replacement parts.
• Before deciding to buy any regal ware cookware replacement parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose regal ware cookware replacement parts and What you should consider when buying the regal ware cookware replacement parts and Where to Buy or Purchase the regal ware cookware replacement parts. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 regal ware cookware replacement parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about regal ware cookware replacement parts.

Conclusion

By our suggestions above, we hope that you can found regal ware cookware replacement parts for you.Please don’t forget to share your experience by comment in this post. Thank you!