seemebag 
Nowadays, there are so many products of water filter oring in the market and you are wondering to choose a best one. You have searched for water filter oring in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter oring which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
19,505 Reviews Scanned
APEC Water Systems Set 3 Pcs 3.5" O.D. Replacement O-Ring for Reverse Osmosis Water Filter Housings
- IMPORTANT: A set of 3 O-rings for standard filter housings of APEC ESSENCE Series RO systems purchased BEFORE 6/1/2013 and AFTER 6/30/2019. ULTIMATE Series RO systems purchased BEFORE 5/1/2015 and after 6/30/2019
- Light weight, easy install and unload
- Diameter 3.5 inch OD
The O-RING-SET contains 3 pieces of 3.5 in. O.D. standard industry size O-RING use to prevent leaks when customer need to change 3 pre-filter of 10 in. standard under sink reverse osmosis system. Recommend to change all O-RINGs once open the housing. Lubricate with clean lubricant and place in grooves below thread to prevent water leaks.
APEC Water Systems does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water system product in “new” condition from Amazon.Com or APEC Water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact APEC Water if you have any question.
Captain O-Ring – Pentek, Pentair Water 151122 Replacement for OEM Size Big Blue O-Ring Buna-N ORing (3 Pack)
- Part: Pentek Water 151122 O-Ring (3 Pack)
- Includes 3 replacement o-rings (also called seals or gaskets) to repair your leaking water filter housing [OEM UPC: 051678511220 , 885343762095]
- 151122 OEM Size o-rings are approximately 5.5″ Inside Diameter x 5.83″ Outside Diameter x 0.165″ Thickness
- Direct Replacement for the following part numbers (see description below for full water filter compatibility list): Ace Hardware 4001756
- American Plumber 152032, W10-OR
- APEC O-RING-HB
- Ametek Kleen-Plus 151122-03
- Culligan OR-100, 151122-27, 01019189
- Pentek 151122, BB BUNA-N
- Manufactured and Warrantied by Captain O-Ring LLC, with decades of experience in the sealing and chemical industry.
Captain O-Ring – Culligan Compatible OR-100 (OR100) O-Ring Replacement for Big Blue Filter Housing Buna-N ORing (3 Pack)
- Part: Replacement Culligan OR-100 O-Ring (3 Pack)
- Compatible with Big Blue Filter Housings, including Culligan HD-950
- Contains 3 O-Rings
- Material: Buna-N (nitrile butadiene rubber)
- Manufactured and Warrantied by Captain O-Ring LLC, with decades of experience in the sealing and chemical industry.
This Culligan OR-100 O-Ring (3 Pack) is compatible with Big Blue Filter Housings, including the Culligan HD-950. It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing.
What to expect:
This item includes three (3) O-Rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging.
Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.
151122 Big Blue Oring Pentek Paentair O-Ring OEM Size 6 Pieces with Dow Molykote 111 O-Ring Lubricant and Scratch Free O-Ring Pick
- Direct Replacement for Pentek 151122 O-Ring, 152032, 4001756, 151122-03, Culligan OR-100, and many others.
- Replace O-rings at every cartridge change to avoid costly water damage, 6 Pack O-Ring Seals, Made of Buna-N Rubber the industry standard, 100% Money Back Guarantee
- Dow Molykote O-ring Silicone Lubricant improves sealing preventing water leaks, helps hold O-Ring in place during assembly
- Certified to NSF Standards 51 and 61, Meets FDA: 21 CFR 175.300
- Non Scratch O-Ring Pick tool aids in removal of old O-rings while reducing the chances of scratching the filter housing O-ring groove.
Kinetic Wares supplies quality replacement parts for home water systems. This Culligan OR-100 (OR100) O-Ring 6 pack is compatible with Big / Compact Housing HBB-20, HBB-10, HBC-20, HBC-10, MWH-D, MWH-D-WELL, MWH-D20, MWH-D20-WELL, MWHSD, MWHSD-WELL, MWHSD20, MWHSD20-WELL, XWH-600, XWH-1000. Ace Hardware 49561; Ametek Kleen-Plus HD-10-R50, BBS; American Plumber W10-PR, 152014, W2010-PR, 152015, W15-PR, 152016, W2015-PR, 152017, WWHC, 152022; Culligan HD-950, HD-950A; Pentek 150237, 150239, 150469, BBFS-22, BBFS-222; Hydronix HF45 Series Housings. Ace Hardware 4001756; American Plumber 152032, W10-OR; Ametek Kleen-Plus 151122-03; Culligan OR-100, 151122-27, 01019189; Pentek 151122, BB BUNA-N. Just to name a few. 100% Satisfaction guarantee! Dow Corning Molykote 111 General purpose O-ring and valve lubricant. Provides a noncuring moisture barrier; high dielectric strength; moisture and ozone resistance; good thermal, oxidation and chemical stability; prevents O-Ring from binding causing leaks, Non-scratch O-Ring Pick aids in removal of O-Rings reducing the chance of scratching the filter housing creating a leak path and dripping filter.
GE HHRING GXWH35F; GXWH40L General Electric HHRING Replacement O-Ring, HHRING, Black
- Replacement O-ring for standard whole home and drinking water filtration systems
- Includes one ring and tube of food-grade silicone compatible with gxwh30c, gxwh35f, gnsh38s, and gxwh40l
- Includes one O-ring and tube of food-grade silicone lubricant
- Seals filtration joint against high water pressure
Fits GE Models: GXWH30C, GXWH35F, GNWH38F, GNWH38S, GXWH40L. Approximately 5-3/4″ diameter by 3/8″ thickness at cross-section. Black rubber with crimp sealed translucent ~1/2″ x 2-1/4″ plastic tube filled with a dollop of ~ 1″ of translucent silicone lubricant.
6-Pack of O-Rings for GE (TM) 2.5 Inch Water Filters – Compatible with GXWH20F, GXWH04F, GXRM10, GXWH20S and GX1S01R – Gaskets/O-Rings/Seals by Impresa Products
- PERFECT REPLACEMENTS: Perfect replacement o-rings / gaskets / seals for GE (TM) 2.5 in water filter housings. Compatible with models GXWH20F, GXWH04F, GXRM10, GXWH20S and GX1S01R – whole home water filtration system
- REPLACE YOUR LOST OR LOOSE GASKET: Gaskets get lost periodically and get warped/worn out over time. A damaged gasket (or no gasket, at all) means a poor seal, leading to a leaky mess. Always have a spare on hand!
- MADE FROM HIGH-QUALITY RUBBER: Our gaskets are made from high-quality, durable rubber and are made to last. 3 5/16 inch inner diameter – 3 9/16 inch outer diameter
- SAVE MONEY, EASY TO INSTALL: Replacement gaskets for these filters are often hard or expensive to find – don’t waste money on expensive replacements! Easy-to-install. 6 gaskets per pack
- Please note: This is an aftermarket product (produced by Impresa Products). We have no affiliation with or endorsement from any of the manufacturers mentioned
GE HHRING Fits GXWH40L, GNWH38S, GXWH30C, GXWH35F, GNWH38F (6 Pack) with Dow Molykote 111 O-Ring Lubricant and Scratch Free O-Ring Pick Tool
- Direct Replacement for GE HHRING, Pentek 151122 O-Ring, 152032, 4001756, 151122-03, Culligan OR-100, and many others.
- Replace O-rings at every cartridge change to avoid costly water damage, 3 Pack O-Ring Seals, Made of Buna-N Rubber the industry standard, 100% Money Back Guarantee
- Dow Molykote O-ring Silicone Lubricant improves sealing preventing water leaks and holds o-ring in place during assembly
- Certified to NSF Standards 51 and 61, Meets FDA: 21 CFR 175.300
- Non Scratch O-Ring Pick tool aids in removal of old O-rings while reducing the chances of scratching the filter housing O-ring groove.
ANCIRS 3 Pcs 3.5" O.D. Replacement O-Rings for 10" Reverse Osmosis Water Filter Housing
- A set of 3 O-rings for standard filter housings of APEC ultimate RO systems and essence RO systems.
- A high quality, low cost alternative to more expensive OEM O-rings.
- Light weight, easy to install and unload.
- Diameter 3.5 inch O.D.
- Fits Housings: AP11S, AP11T, AP12S, AP12T, AP26T, AP51T, AP101S, AP101T, AP102S, AP102T, AP110, etc
A set of 3 O-rings for standard filter housings of ultimate systems and essence systems.
Captain O-Ring – Whirlpool WHKF-DWHV, WHKF-DWH & WHKF-DUF Water Filter Replacement Orings (3 Pack)
- Replacement O-Rings for Whirlpool filter housings that require a 2.5 inch cartridge
- Includes three (3) o-rings
- O-Ring inner dimension 3.48 inch x 0.14 inch (88mm x 3.53mm). Please note that these o-rings are for filters that accept the thinner 2.5” wide filter cartridge and not the larger 4.5” wide filter cartridge.
- Durable Nitrile Butadiene (Buna-N) Rubber Construction
- Manufactured and Warrantied for one year by Captain O-Ring LLC
Three (3) replacement o-rings for your Whirlpool Filter. Compatible with Whirlpool filter housings WHKF-DWH, WHKF-DWHV, WHCF-DWHV, WHCF-DUF, and WHKF-DUF. Captain O-Ring’s top quality replacement o-rings create a watertight seal between your water filter sump and the water filter head.
What to expect:
This item includes three (3) O-Rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging.
Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.
Conclusion
By our suggestions above, we hope that you can found water filter oring for you.Please don’t forget to share your experience by comment in this post. Thank you!
