Which Is The Best Vga Cooling Block Gtx 960

The kryoM.2 is a PCIe 4x adapter for M.2/M-Key NGFF PCIe SSD and is compatible with the form factors 2280, 2260 and 2242. The adapter uses a multilayer PCB with gold surface where the individual layers are connected to each other to optimize the thermal management. The SSD is installed with a thermal pad which already allows a better cooling over regular adapters. The water block covers the front side of the SSD with a second thermal pad and ensures maximum performance of high speed SSDs. The connector terminal of the water block is the same as used for the kryographics blocks. This allows using kryoconnect adapter kits to connect several blocks directly with each other. To ensure a good quality and reliability the connector for the M.2 SSD comes from Amphenol, the PCIe contacts are plated with hard gold and the circuit paths are impedance controlled.

Model: 53228

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

The glacier G1080 founders Edition is made from premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, Acrylic top and sandblasted cover plates for an elegant look. Glacier G1080 founders Edition is a full cover water block. The G1080 founders Edition water block covers the entire PCB of the card allowing the graphics card and its VRM to remain cool and stable. The G1080 founders Edition water block has a 9mm copper base for higher level of heat dissipation and heat transfer. The sealing is ensured by DuPont Viton rubber washers. The military-grade Viton increase temperature capability and stands up to aggressive fluids. The Viton rubber washers offers ruggedness so seals and components resist damage during installation and use. The Viton retains sealing force to prevent leaks even after compression for long periods. Glacier G1080 founders Edition uses the same RGB connector as our Phanteks cases so installation will be a breeze. With the RGB control of our compatible Phanteks cases, the G1080 founders Edition can synchronize with the case. Use the included RGB adapter (ph-cb4rgb) and you can sync with motherboards’ that support the 4pin RGB header including the ROG aura/MSI mystic light. The water block features a connection terminal that has a significantly Reduced flow resistance for an outstanding cooling performance.

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.

Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.

Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40

Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)

Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer

Antec
KUHLER H2O 920V4, 620V4, 920, 620

Zalman
LQ-320, LQ-315, LQ-310

Size:RTX2070
Compatibilities: Gainward GeForce RTX 2070
Compatibilities: Gainward GeForce RTX 2070 OC
Compatibilities: Galax GeForce RTX 2070
Compatibilities: Galax GeForce RTX 2070 OC
Compatibilities: iGame Geforce RTX 2070 Ultra OC HA1
Compatibilities: Gigabyte Geforce RTX 2070 Gaming OC 8G(rev.1.0)
Compatibilities: MSI GeFocre RTX 2070 8G Duke
Compatibilities: Colorful iGame GeForce RTX 2070 Ultra OC
Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
Due to the limitation of the number of words in the description box, it cannot be written as all compatible models. In fact, this GPU BLOCK is compatible with B BYKSKI RBW LED GPU VGA Water Cooling Block for NVIDIA ASUS MSI EVGA Galax GIGABYTE Zotac Colorful PNY MAXSUN Palit RTX 2080Ti/2080/2070/2060/Titan (RTX Titan) andB BYKSKI RBW LED GPU VGA Water Cooling Block for NVIDIA ASUS MSI EVGA Galax GIGABYTE Zotac Colorful PNY MAXSUN Palit RTX 2080Ti/2080/2070/2060/Titan (RTX 2060)and B BYKSKI RBW LED GPU VGA Water Cooling Block Compatible for NVIDIA ASUS MSI EVGA Galax GIGABYTE Zotac Colorful PNY MAXSUN Palit RTX 2080Ti / 2080 (RTX 2080 Block) and B BYKSKI RBW LED GPU VGA Water Cooling Block Compatible for NVIDIA ASUS MSI EVGA Galax GIGABYTE Zotac Colorful PNY MAXSUN Palit RTX 2080Ti / 2080 (RTX 2080Ti Block) all models，So the GPU Blocks we send to buyers is 2080TI GPU Blocks.

Compatibilities:Gigabyte Geforce RTX2060 GAMING OC PRO
Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation.
4. Inlet and outlet can change direction free, easy to build video game system.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are sure.
2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included.
3. The pictures are for reference only, we can only guarantee the performance and compatibility of the products, the factory can change product design at any time for the improvement of the product.
4. Prohibit the use of alcohol containing coolant. 5. Graphics card block installation requires a certain skill and experience.

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

The Corsair Hydro x series XG7 20-series GPU water block is a total conversion copper water block for your NVIDIA GeForce RTX 2080 Ti graphics card. Precision CNC-milled nickel-plated copper construction and more than 50 high-density cooling fins positioned over the GPU maximize thermal transfer and Surface area, for dramatically lower temperatures and maximum performance. A fully transparent flow path and discrete RGB lighting puts your graphics card on full display, When combined with a Corsair lighting Node Pro or Commander Pro and Corsair CUE software. A full-length aluminum casing and included backplate encloses all your graphics card’s critical components for a total conversion to custom cooling. With pre-applied thermal material, standard G1/4” threads and easy to follow step-by-step instructions, it’s never been easier to unlock the true potential of your NVIDIA GeForce RTX 2080 Ti. Tech Support # 1-888-222-4346 opt # 1. Operating Temperature : 60°C coolant temperature

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 80 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
2 X CPU Water Cooling Block

Lilink– 3 Sizes Aluminum Water Cooling Block Liquid Water Cooler Heat Sink System for CPU Graphics Radiator Heatsink

Specification:
Condition: 100% Brand New
Item Type: Water Cooling Block
Material: Pure Aluminum
Processing: Vacuum Aluminum Brazing
Interface outer diameter: Approx. 9.5mm / 3.7in
Interface inner diameter: Approx. 6mm / 2.4in
Application: Suitable for computer CPU water, industrial inverter drive, laser head cooling, industrial control cabinet cooling
Optional Size:
#1: Approx. 80 * 80 * 15mm / 3.1 * 3.1 * 0.6in
#2: Approx. 80 * 160 * 15mm / 3.1 * 6.3 * 0.6in
#3: Approx. 80 * 250 * 15mm / 3.1 * 9.8 * 0.6in

Package List:
1 * Water Cooling Block

Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Conclusion

By our suggestions above, we hope that you can found vga cooling block gtx 960 for you.Please don’t forget to share your experience by comment in this post. Thank you!